P0717 Audi Code - Input Turbine Speed Sensor Circuit No Signal
Quick Answer
The Input Speed Sensor detects the primary pulley revolution speed and sends a signal to the Transmission Control Module (TCM) and Engine Control Module (ECM). Common causes include Faulty Transmission Speed Sensor, Transmission Speed Sensor harness is open or shorted, Transmission Speed Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0717 Audi indicates Input Turbine Speed Sensor Circuit No Signal.
- Common causes
- Common causes include Faulty Transmission Speed Sensor, Transmission Speed Sensor harness is open or shorted, Transmission Speed Sensor circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0717 Audi Description
What are the Possible Causes of the DTC P0717 Audi?
- Faulty Transmission Speed Sensor
- Transmission Speed Sensor harness is open or shorted
- Transmission Speed Sensor circuit poor electrical connection
How to Fix the DTC P0717 Audi?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0717 Audi code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0717 Audi code?
Need more information on how to fix the P0717 Audi code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0717 Audi code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0717 Audi Code
What does the OBDII code P0717 mean for an Audi?
P0717 indicates a problem with the Input Turbine Speed Sensor Circuit, specifically that no signal is being detected by the transmission control module (TCM).
What are the common symptoms of code P0717 in an Audi?
Symptoms may include erratic shifting, delayed gear engagement, transmission slipping, poor acceleration, or the vehicle entering limp mode.
What causes the P0717 code to appear in an Audi?
Common causes include a faulty input speed sensor, damaged wiring or connectors, a malfunctioning transmission control module (TCM), or internal transmission issues.
Can driving with code P0717 damage my Audi's transmission?
Yes, prolonged driving with this issue can cause further transmission damage due to improper gear shifting or overheating.
How do I diagnose the P0717 code in my Audi?
Diagnosis typically involves checking the input speed sensor, inspecting wiring and connectors for damage, and testing the transmission control module (TCM).
How much does it cost to repair code P0717 in an Audi?
Repair costs can vary depending on the issue but may range from $150 to $400 for sensor replacement, with higher costs if wiring or the TCM needs repair.
Can I fix the P0717 code myself?
If you’re experienced with automotive repairs, you may be able to replace the input speed sensor or repair damaged wiring. Otherwise, professional assistance is recommended.
What tools are needed to troubleshoot code P0717 on an Audi?
You’ll typically need an OBDII scanner, multimeter, and possibly wiring diagrams for the transmission system.
Does code P0717 always mean the input speed sensor is defective?
No, the issue could also stem from wiring problems or faults in the transmission control module.
How can I prevent code P0717 from occurring in my Audi?
Regular maintenance of the transmission system, including inspecting wiring and connectors, can help prevent this issue.
Discuss the causes and fixes for P0717 Audi OBDII Code
-
I haven't replaced it yet, where is this sensor located on the Audi A4 B6 multitronic 1.8T 2003 gearbox.
-
The Transmission Speed Sensor is located inside the transmission. Unfortunately don't have a clear image of the sensor, but you have to remove the transmission oil pan to access the sensor.
-
good day everyone, please i drive audi a6 quattro which am also having same issue.. i had change the input speed sensor and still the same. please some should help. thanks
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
