AutoCodes – Honda – P0717 2020 Honda CR-V

P0717 2020 Honda CR-V Code - Input/Turbine Speed Sensor 'A' Circuit No Signal

Quick Answer

The Torque Converter Turbine Speed Sensor is attached to the outside of the transmission housing. Common causes include Faulty Torque Converter Turbine Speed Sensor, Torque Converter Turbine Speed Sensor harness is open or shorted, Torque Converter Turbine Speed Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P0717 2020 Honda CR-V indicates Input/Turbine Speed Sensor 'A' Circuit No Signal.
Common causes: Common causes include Faulty Torque Converter Turbine Speed Sensor, Torque Converter Turbine Speed Sensor harness is open or shorted, Torque Converter Turbine Speed Sensor circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs Step-by-Step Diagnostic Guide My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 236

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Jan 15, 2024

Description
Step-by-Step Diagnostic Guide
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P0717 2020 Honda CR-V Description

The Torque Converter Turbine Speed Sensor is attached to the outside of the transmission housing. The Torque Converter Turbine Speed Sensor detects the number of revolutions of the gear on the input shaft and sends a pulsing signal to the Powertrain Control Module (PCM). The PCM converts the pulses to torque converter turbine speed. If no pulses occur with the input shaft rotating, the PCM detects a malfunction that may be caused by an open, an intermittent open, or a short to ground. Based on the correlation between the Torque Converter Turbine Speed Sensor and the CVT drive pulley speed sensor, the PCM detects a malfunction and stores a Diagnostic Trouble Code (DTC).

OBDII Code P0717 2020 Honda CR-V - Input/Turbine Speed Sensor 'A' Circuit No Signal - AutoCodes.com — P0717 2020 Honda CR-V Code - Input/Turbine Speed Sensor 'A' Circuit No Signal

What does this mean?

What are the Possible Causes of the DTC P0717 2020 Honda CR-V?

Faulty Torque Converter Turbine Speed Sensor
Torque Converter Turbine Speed Sensor harness is open or shorted
Torque Converter Turbine Speed Sensor circuit poor electrical connection
Faulty Powertrain Control Module (PCM)

How to Fix the DTC P0717 2020 Honda CR-V?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P0717 2020 Honda CR-V code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P0717 2020 Honda CR-V code?

Need more information on how to fix the P0717 2020 Honda CR-V code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0717 2020 Honda CR-V code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0717 2020 Honda CR-V Code

1. What are the common symptoms of OBDII code P0717 in a 2020 Honda CR-V?

- Common symptoms include issues with shifting gears, erratic speedometer readings, and the transmission going into limp mode.

2. What does the OBDII code P0717 'Input/Turbine Speed Sensor 'A' Circuit No Signal' mean for a 2020 Honda CR-V?

- This code indicates that the vehicle's ECM has detected a lack of signal from the input/turbine speed sensor 'A' in the transmission.

3. What are the possible causes of OBDII code P0717 in a 2020 Honda CR-V?

- Potential causes include a faulty input/turbine speed sensor, damaged wiring or connectors leading to the sensor, or issues with the sensor's circuitry.

4. How can I diagnose the OBDII code P0717 in my 2020 Honda CR-V?

- Diagnosing this code typically involves checking the input/turbine speed sensor 'A' for proper function, inspecting wiring and connectors for damage, and testing the sensor's circuit.

5. Can I continue driving my 2020 Honda CR-V with OBDII code P0717?

- It is not recommended to continue driving with this code as it can lead to further transmission issues and potential safety hazards. It's best to address the problem promptly.

6. How can I repair OBDII code P0717 in my 2020 Honda CR-V?

- Repairing this code may involve replacing the input/turbine speed sensor 'A', repairing or replacing damaged wiring or connectors, or resetting the ECM after fixing the issue.

7. Will resetting the ECM clear OBDII code P0717 from a 2020 Honda CR-V?

- Resetting the ECM may clear the code temporarily, but if the underlying issue causing the code is not addressed, it is likely to reappear after driving the vehicle.

8. Is it possible to prevent OBDII code P0717 from occurring in a 2020 Honda CR-V?

- Regular maintenance of the transmission system, including checking sensor connections and wiring, can help prevent issues that may trigger this code.

9. Can a DIY enthusiast resolve OBDII code P0717 in a 2020 Honda CR-V?

- While some may attempt to diagnose and repair this code themselves, it is recommended to consult a professional mechanic or technician due to the complexity of transmission systems.

10. How much does it cost to fix OBDII code P0717 in a 2020 Honda CR-V?

- The cost to fix this code can vary depending on the specific issue, but it may involve sensor replacement, wiring repairs, or related labor costs, which could range from a few hundred to over a thousand dollars.