AutoCodes – Honda – P0717 2018 Honda CR-V

P0717 2018 Honda CR-V Code - Input/Turbine Speed Sensor 'A' Circuit No Signal

Quick Answer

The Torque Converter Turbine Speed Sensor is attached to the outside of the transmission housing. Common causes include Faulty Torque Converter Turbine Speed Sensor, Torque Converter Turbine Speed Sensor harness is open or shorted, Torque Converter Turbine Speed Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P0717 2018 Honda CR-V indicates Input/Turbine Speed Sensor 'A' Circuit No Signal.
Common causes: Common causes include Faulty Torque Converter Turbine Speed Sensor, Torque Converter Turbine Speed Sensor harness is open or shorted, Torque Converter Turbine Speed Sensor circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs Step-by-Step Diagnostic Guide My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 465

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Jan 15, 2024

Description
Step-by-Step Diagnostic Guide
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P0717 2018 Honda CR-V Description

The Torque Converter Turbine Speed Sensor is attached to the outside of the transmission housing. The Torque Converter Turbine Speed Sensor detects the number of revolutions of the gear on the input shaft and sends a pulsing signal to the Powertrain Control Module (PCM). The PCM converts the pulses to torque converter turbine speed. If no pulses occur with the input shaft rotating, the PCM detects a malfunction that may be caused by an open, an intermittent open, or a short to ground. Based on the correlation between the Torque Converter Turbine Speed Sensor and the CVT drive pulley speed sensor, the PCM detects a malfunction and stores a Diagnostic Trouble Code (DTC).

OBDII Code P0717 2018 Honda CR-V - Input/Turbine Speed Sensor 'A' Circuit No Signal - AutoCodes.com — P0717 2018 Honda CR-V Code - Input/Turbine Speed Sensor 'A' Circuit No Signal

What does this mean?

What are the Possible Causes of the DTC P0717 2018 Honda CR-V?

Faulty Torque Converter Turbine Speed Sensor
Torque Converter Turbine Speed Sensor harness is open or shorted
Torque Converter Turbine Speed Sensor circuit poor electrical connection
Faulty Powertrain Control Module (PCM)

How to Fix the DTC P0717 2018 Honda CR-V?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P0717 2018 Honda CR-V code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P0717 2018 Honda CR-V code?

Need more information on how to fix the P0717 2018 Honda CR-V code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0717 2018 Honda CR-V code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0717 2018 Honda CR-V Code

1. What are the common symptoms of OBDII code P0717 in a 2018 Honda CR-V?

The common symptoms of OBDII code P0717 in a 2018 Honda CR-V include issues with the transmission shifting smoothly, incorrect or erratic gear shifts, and potential stalling while driving.

2. What is the likely cause of OBDII code P0717 in a 2018 Honda CR-V?

The most likely cause of OBDII code P0717 in a 2018 Honda CR-V is a malfunction in the Input/Turbine Speed Sensor 'A' circuit, leading to a lack of signal being sent to the vehicle's transmission control module.

3. How can I diagnose the Input/Turbine Speed Sensor 'A' circuit issue in a 2018 Honda CR-V?

To diagnose the Input/Turbine Speed Sensor 'A' circuit issue, you can use a scan tool to read the OBDII code P0717 and perform a visual inspection of the sensor and its wiring for any signs of damage or corrosion.

4. Can I continue driving my 2018 Honda CR-V with OBDII code P0717?

It is not recommended to continue driving your 2018 Honda CR-V with OBDII code P0717, as it can lead to further damage to the transmission system. It is best to address the issue promptly to avoid more extensive repairs.

5. How can I repair OBDII code P0717 in a 2018 Honda CR-V?

Repairing OBDII code P0717 in a 2018 Honda CR-V typically involves replacing the Input/Turbine Speed Sensor 'A' and addressing any damaged wiring or connections related to the sensor to restore proper functionality.

6. Is it possible to reset OBDII code P0717 in a 2018 Honda CR-V without fixing the underlying issue?

While you can clear the OBDII code P0717 temporarily by resetting the vehicle's computer, the code is likely to reappear until the underlying issue with the Input/Turbine Speed Sensor 'A' circuit is resolved.

7. Can a DIY enthusiast fix OBDII code P0717 in a 2018 Honda CR-V?

DIY enthusiasts with the necessary tools and automotive repair experience may be able to fix OBDII code P0717 in a 2018 Honda CR-V by replacing the Input/Turbine Speed Sensor 'A' themselves. However, it is recommended to consult a professional if unsure.

8. How much does it cost to repair OBDII code P0717 in a 2018 Honda CR-V at a mechanic?

The cost to repair OBDII code P0717 in a 2018 Honda CR-V at a mechanic can vary depending on the labor rates in your area, but it typically ranges from $200 to $400, including parts and labor for replacing the Input/Turbine Speed Sensor 'A'.

9. Are there any recalls related to OBDII code P0717 in a 2018 Honda CR-V?

As of now, there are no specific recalls related to OBDII code P0717 in a 2018 Honda CR-V. However, it is advisable to check with Honda or your local dealership for any updated information on recalls or technical service bulletins.

10. How long does it take to repair OBDII code P0717 in a 2018 Honda CR-V?

The repair time for OBDII code P0717 in a 2018 Honda CR-V can vary depending on the mechanic's workload and availability of parts. Typically, it takes around 1-2 hours to replace the Input/Turbine Speed Sensor 'A' and address any wiring issues.