P0717 2016 Toyota RAV4 Code - Input Speed Sensor Circuit No Signal
Quick Answer
The Input Speed sensor detects the rotation speed of the turbine which indicates the input speed of the transaxle. Common causes include Faulty Transmission Speed Sensor NT (Transmission Revolution Sensor), Transmission Speed Sensor harness is open or shorted, Transmission Speed Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0717 2016 Toyota RAV4 indicates Input Speed Sensor Circuit No Signal.
- Common causes
- Common causes include Faulty Transmission Speed Sensor NT (Transmission Revolution Sensor), Transmission Speed Sensor harness is open or shorted, Transmission Speed Sensor circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0717 2016 Toyota RAV4 Description
The NT terminal of the ECM detects a pulse signal from the speed sensor NT (input RPM). The ECM calculates gear shifts by comparing the signal from speed sensor NT with the signal from speed sensor NC.
While the transaxle is operating in 2nd, 3rd, 4th, 5th, or 6th gear with the shift lever in D, if the input shaft speed is less than 300 rpm although the output shaft speed is more than 1000 rpm, the ECM interprets this as a fault, illuminates the MIL and stores the Diagnostic Trouble Code (DTC).
What are the Possible Causes of the DTC P0717 2016 Toyota RAV4?
- Faulty Transmission Speed Sensor NT (Transmission Revolution Sensor)
- Transmission Speed Sensor harness is open or shorted
- Transmission Speed Sensor circuit poor electrical connection
- Faulty Engine Control Module (ECM)
How to Fix the DTC P0717 2016 Toyota RAV4?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0717 2016 Toyota RAV4 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0717 2016 Toyota RAV4 code?
Need more information on how to fix the P0717 2016 Toyota RAV4 code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0717 2016 Toyota RAV4 code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0717 2016 Toyota RAV4 Code
1. What are the common symptoms of OBDII code P0717 in a 2016 Toyota RAV4?
The common symptoms include erratic shifting, harsh shifting, delayed engagement when shifting gears, and possibly the transmission going into a failsafe mode.
2. What does the OBDII code P0717 in a 2016 Toyota RAV4 mean?
The code P0717 indicates a problem with the Input Speed Sensor Circuit in the transmission, specifically that there is no signal being received from the sensor.
3. What are the possible causes of OBDII code P0717 in a 2016 Toyota RAV4?
Possible causes include a faulty input speed sensor, damaged wiring or connectors in the sensor circuit, a defective transmission control module (TCM), or internal transmission issues.
4. How can I diagnose the Input Speed Sensor Circuit issue in a 2016 Toyota RAV4?
Diagnosing the problem typically involves checking the sensor's wiring and connectors for damage, testing the sensor's resistance, and verifying the sensor's signal with a scan tool while the vehicle is in motion.
5. Can I drive my 2016 Toyota RAV4 with the OBDII code P0717 present?
It is not recommended to drive the vehicle with the P0717 code present, as it can lead to further transmission damage and safety issues. It's best to have the issue diagnosed and repaired as soon as possible.
6. How can I repair the Input Speed Sensor Circuit issue in my 2016 Toyota RAV4?
Repairing the issue may involve replacing the input speed sensor, repairing any damaged wiring or connectors, resetting the fault code, and conducting a test drive to ensure the problem is resolved.
7. Is it possible to reset the OBDII code P0717 in a 2016 Toyota RAV4 without fixing the underlying issue?
While you can clear the code with an OBDII scanner, the code is likely to return if the root cause of the problem is not addressed. It's essential to diagnose and repair the issue to prevent further damage.
8. How much does it cost to fix the Input Speed Sensor Circuit issue in a 2016 Toyota RAV4?
The cost of fixing the issue can vary depending on the specific cause of the problem, the labor rates at the repair shop, and whether genuine Toyota parts are used. It's advisable to get a few quotes from reputable mechanics.
9. Can a DIY enthusiast fix the Input Speed Sensor Circuit issue in a 2016 Toyota RAV4?
While some experienced DIY enthusiasts may be able to diagnose and replace the input speed sensor themselves, troubleshooting transmission issues can be complex. It's recommended to consult a professional if you're uncertain.
10. How long does it take to repair the Input Speed Sensor Circuit issue in a 2016 Toyota RAV4?
The repair time can vary based on the exact problem and the technician's experience. Generally, it can take a few hours to a full day to diagnose and fix the Input Speed Sensor Circuit issue in a 2016 Toyota RAV4.
Discuss the causes and fixes for P0717 2016 Toyota RAV4 OBDII Code
Code P0717 2016 Toyota RAV4 comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
