AutoCodesToyota – P0717 2008 Toyota Camry

P0717 2008 Toyota Camry Code - Turbine Speed Sensor Circuit No Signal

Quick Answer

The Input Speed Sensor detects the primary pulley revolution speed and sends a signal to the Transmission Control Module (TCM) and Engine Control Module (ECM). Common causes include Faulty Transmission Speed Sensor NT, Transmission Speed Sensor NT harness is open or shorted, Transmission Speed Sensor NT circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
P0717 2008 Toyota Camry indicates Turbine Speed Sensor Circuit No Signal.
Common causes
Common causes include Faulty Transmission Speed Sensor NT, Transmission Speed Sensor NT harness is open or shorted, Transmission Speed Sensor NT circuit poor electrical connection.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
AI answers can be wrong. Verify repairs with testing. Open full chat
Code Popularity 11,682
How popular is this code, among other codes? Low
Table of contents Created and updated by William Orellana on Feb 12, 2019
💬 Need more help? Ask Coddy for instant answers — it's free!

Code P0717 2008 Toyota Camry Description

The Input Speed Sensor detects the primary pulley revolution speed and sends a signal to the Transmission Control Module (TCM) and Engine Control Module (ECM). The ECM sets the OBDII code when the Input Speed Sensor is out of factory specifications.
OBDII Code P0717 2008 Toyota Camry - Turbine Speed Sensor Circuit No Signal - AutoCodes.com
P0717 2008 Toyota Camry Code - Turbine Speed Sensor Circuit No Signal

What are the Possible Causes of the DTC P0717 2008 Toyota Camry?

  • Faulty Transmission Speed Sensor NT
  • Transmission Speed Sensor NT harness is open or shorted
  • Transmission Speed Sensor NT circuit poor electrical connection
  • ECM
  • Faulty Valve Body

How to Fix the DTC P0717 2008 Toyota Camry?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P0717 2008 Toyota Camry code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P0717 2008 Toyota Camry code?

Need more information on how to fix the P0717 2008 Toyota Camry code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0717 2008 Toyota Camry code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0717 2008 Toyota Camry Code

1. What does OBDII code P0717 mean on a 2008 Toyota Camry?

P0717 indicates that the transmission control module (TCM) has detected no signal from the turbine speed sensor, which monitors the input shaft speed of the transmission.

2. What are the symptoms of code P0717 in a 2008 Toyota Camry?

Common symptoms include delayed or harsh shifting, erratic speedometer readings, reduced fuel efficiency, and the vehicle entering "limp mode."

3. What causes the P0717 code on a 2008 Toyota Camry?

Potential causes include a faulty turbine speed sensor, damaged wiring or connectors, a malfunctioning transmission control module (TCM), or internal transmission issues.

4. Can I drive my 2008 Toyota Camry with the P0717 code?

Driving with this code is not recommended, as it can lead to transmission damage, reduced performance, and unsafe driving conditions.

5. How do I diagnose the P0717 code on a 2008 Toyota Camry?

Diagnosis involves inspecting the turbine speed sensor, checking for damaged wiring or loose connections, and using a scan tool to monitor sensor data and confirm the lack of signal.

6. How do I fix code P0717 on my 2008 Toyota Camry?

Repairs may include replacing the turbine speed sensor, repairing damaged wiring or connectors, or, in rare cases, replacing the TCM or addressing internal transmission problems.

7. Where is the turbine speed sensor located on a 2008 Toyota Camry?

The turbine speed sensor is typically located on or near the transmission housing and monitors the input shaft's rotational speed.

8. What tools do I need to fix the P0717 code?

You may need a scan tool, a multimeter for electrical testing, basic hand tools, and potentially a repair manual for sensor location and specifications.

9. How much does it cost to fix the P0717 code on a 2008 Toyota Camry?

The repair cost depends on the issue. Replacing a turbine speed sensor typically costs $150–$400, including parts and labor, while more complex issues may cost more.

10. Can a P0717 code cause transmission damage in a 2008 Toyota Camry?

If left unaddressed, the lack of accurate transmission input speed data can lead to improper shifting, which may cause long-term transmission damage.

Discuss the causes and fixes for P0717 2008 Toyota Camry OBDII Code

Code P0717 2008 Toyota Camry comments

No comments found for this page.

AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play