AutoCodes – Honda – P0716 2020 Honda CR-V

P0716 2020 Honda CR-V Code - Input/Turbine Speed Sensor 'A' Circuit Range/Performance

Quick Answer

The Torque Converter Turbine Speed Sensor is attached to the outside of the transmission housing. Common causes include Faulty Torque Converter Turbine Speed Sensor, Torque Converter Turbine Speed Sensor harness is open or shorted, Torque Converter Turbine Speed Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P0716 2020 Honda CR-V indicates Input/Turbine Speed Sensor 'A' Circuit Range/Performance.
Common causes: Common causes include Faulty Torque Converter Turbine Speed Sensor, Torque Converter Turbine Speed Sensor harness is open or shorted, Torque Converter Turbine Speed Sensor circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 166

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Jan 15, 2024

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P0716 2020 Honda CR-V Description

The Torque Converter Turbine Speed Sensor is attached to the outside of the transmission housing. The Torque Converter Turbine Speed Sensor detects the number of revolutions of the gear on the input shaft and sends a pulsing signal to the Powertrain Control Module (PCM). The PCM converts the pulses to torque converter turbine speed. If no pulses occur with the input shaft rotating, the PCM detects a malfunction that may be caused by an open, an intermittent open, or a short to ground. Based on the correlation between the Torque Converter Turbine Speed Sensor and the CVT drive pulley speed sensor, the PCM detects a malfunction and stores a Diagnostic Trouble Code (DTC).

OBDII Code P0716 2020 Honda CR-V - Input/Turbine Speed Sensor 'A' Circuit Range/Performance - AutoCodes.com — P0716 2020 Honda CR-V Code - Input/Turbine Speed Sensor 'A' Circuit Range/Performance

What does this mean?

What are the Possible Causes of the DTC P0716 2020 Honda CR-V?

Faulty Torque Converter Turbine Speed Sensor
Torque Converter Turbine Speed Sensor harness is open or shorted
Torque Converter Turbine Speed Sensor circuit poor electrical connection
Faulty Powertrain Control Module (PCM)

How to Fix the DTC P0716 2020 Honda CR-V?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P0716 2020 Honda CR-V code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P0716 2020 Honda CR-V code?

Need more information on how to fix the P0716 2020 Honda CR-V code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0716 2020 Honda CR-V code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0716 2020 Honda CR-V Code

1. What are the common symptoms of OBDII code P0716 in a 2020 Honda CR-V?

- Common symptoms may include erratic shifting, harsh shifting, transmission slipping, and the transmission going into limp mode.

2. What does the Input/Turbine Speed Sensor 'A' Circuit Range/Performance error code mean in a 2020 Honda CR-V?

- This code indicates that there is an issue with the input or turbine speed sensor circuit in the transmission, affecting its performance.

3. What are the potential causes of the P0716 code in a 2020 Honda CR-V?

- Possible causes include a faulty input/turbine speed sensor, damaged sensor wiring, a poor electrical connection, or issues with the transmission control module.

4. How can I diagnose the P0716 code in my 2020 Honda CR-V?

- Diagnosis typically involves using a scan tool to retrieve the code, checking the sensor wiring for damage, testing the sensor's resistance, and verifying the signal output.

5. Can I continue driving my 2020 Honda CR-V with the P0716 error code?

- It is not recommended to drive your vehicle with the P0716 code present, as it can lead to further transmission damage and potentially unsafe driving conditions.

6. How can I repair the Input/Turbine Speed Sensor 'A' Circuit Range/Performance issue in my 2020 Honda CR-V?

- Repair options may include replacing the faulty sensor, repairing damaged wiring, ensuring proper electrical connections, or resetting the transmission control module.

7. Is it possible to clear the P0716 code in a 2020 Honda CR-V without fixing the underlying issue?

- While you can clear the code temporarily, it will likely reappear if the root cause of the problem is not addressed, potentially causing more severe transmission issues.

8. Will replacing the input/turbine speed sensor fix the P0716 code in my 2020 Honda CR-V?

- In many cases, replacing the sensor can resolve the P0716 code, but it's essential to ensure proper diagnosis to rule out other potential causes.

9. How much does it typically cost to repair the P0716 code in a 2020 Honda CR-V?

- The cost of repairing the P0716 code can vary depending on the specific issue, but it may range from a few hundred to over a thousand dollars, including parts and labor.

10. Can I fix the Input/Turbine Speed Sensor 'A' Circuit Range/Performance problem in my 2020 Honda CR-V myself?

- While some DIY enthusiasts may be able to replace the sensor or address wiring issues, it's recommended to consult with a professional mechanic for accurate diagnosis and repair.