P0716 2019 Honda CR-V Code - Input/Turbine Speed Sensor 'A' Circuit Range/Performance
Quick Answer
The Torque Converter Turbine Speed Sensor is attached to the outside of the transmission housing. Common causes include Faulty Torque Converter Turbine Speed Sensor, Torque Converter Turbine Speed Sensor harness is open or shorted, Torque Converter Turbine Speed Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0716 2019 Honda CR-V indicates Input/Turbine Speed Sensor 'A' Circuit Range/Performance.
- Common causes
- Common causes include Faulty Torque Converter Turbine Speed Sensor, Torque Converter Turbine Speed Sensor harness is open or shorted, Torque Converter Turbine Speed Sensor circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0716 2019 Honda CR-V Description
What are the Possible Causes of the DTC P0716 2019 Honda CR-V?
- Faulty Torque Converter Turbine Speed Sensor
- Torque Converter Turbine Speed Sensor harness is open or shorted
- Torque Converter Turbine Speed Sensor circuit poor electrical connection
- Faulty Powertrain Control Module (PCM)
How to Fix the DTC P0716 2019 Honda CR-V?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0716 2019 Honda CR-V code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0716 2019 Honda CR-V code?
Need more information on how to fix the P0716 2019 Honda CR-V code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0716 2019 Honda CR-V code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0716 2019 Honda CR-V Code
1. What does the OBDII code P0716 mean on a 2019 Honda CR-V?
P0716 indicates an issue with the Input/Turbine Speed Sensor 'A' Circuit, specifically a range or performance problem where the sensor's signal is out of expected parameters.
2. What are the symptoms of code P0716 in a 2019 Honda CR-V?
Common symptoms include erratic or delayed shifting, transmission slipping, reduced fuel efficiency, or triggering of the check engine light.
3. What causes the P0716 code to appear on a 2019 Honda CR-V?
The code can be caused by a faulty input/turbine speed sensor, damaged wiring or connectors, transmission fluid issues, or a malfunctioning transmission control module (TCM).
4. Can I drive my 2019 Honda CR-V with a P0716 code?
Driving with this code is not recommended as it can cause further damage to the transmission or lead to unsafe driving conditions due to shifting issues.
5. How do you diagnose the P0716 code on a 2019 Honda CR-V?
Diagnosis involves scanning for codes, inspecting the input speed sensor and its wiring for damage, checking transmission fluid levels and quality, and testing the sensor's signal with a multimeter or oscilloscope.
6. How do you fix the P0716 code on a 2019 Honda CR-V?
Repairs may include replacing the input/turbine speed sensor, repairing or replacing damaged wiring or connectors, and addressing transmission fluid issues such as low levels or contamination.
7. What is the input/turbine speed sensor's role in a 2019 Honda CR-V?
The input/turbine speed sensor monitors the rotational speed of the transmission’s input shaft and sends this data to the TCM to control shifting and optimize performance.
8. How much does it cost to fix the P0716 code on a 2019 Honda CR-V?
Repair costs can vary but typically range from $150 to $400, depending on whether the issue is a sensor replacement or wiring repair. Labor rates and part costs may affect the total.
9. Can low transmission fluid cause the P0716 code on a 2019 Honda CR-V?
Yes, low or contaminated transmission fluid can cause erratic sensor readings, leading to the P0716 code.
10. How can I prevent the P0716 code from recurring on my 2019 Honda CR-V?
Regular maintenance, including checking transmission fluid levels and quality, inspecting wiring and connectors, and addressing transmission issues promptly, can help prevent this code from recurring.
Discuss the causes and fixes for P0716 2019 Honda CR-V OBDII Code
Code P0716 2019 Honda CR-V comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
