P0714 Jeep Code - Transmission Fluid Temperature Sensor Intermittent
Quick Answer
The ATF (Automatic Transmission Fluid) Temperature Sensor converts the fluid temperature into a resistance value. Common causes include Faulty Transmission Fluid Temperature Sensor, Transmission Fluid Temperature Sensor harness is open or shorted, Transmission Fluid Temperature Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0714 Jeep indicates Transmission Fluid Temperature Sensor Intermittent.
- Common causes
- Common causes include Faulty Transmission Fluid Temperature Sensor, Transmission Fluid Temperature Sensor harness is open or shorted, Transmission Fluid Temperature Sensor circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0714 Jeep Description
What are the Possible Causes of the DTC P0714 Jeep?
- Faulty Transmission Fluid Temperature Sensor
- Transmission Fluid Temperature Sensor harness is open or shorted
- Transmission Fluid Temperature Sensor circuit poor electrical connection
How to Fix the DTC P0714 Jeep?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0714 Jeep code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0714 Jeep code?
Need more information on how to fix the P0714 Jeep code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0714 Jeep code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0714 Jeep Code
1. What are the common symptoms of OBDII code P0714 in a Jeep related to the Transmission Fluid Temperature Sensor Intermittent issue?
- Common symptoms include erratic shifting, transmission slipping, overheating, and the transmission going into limp mode.
2. What are the possible causes of OBDII code P0714 in a Jeep?
- The code can be triggered by issues such as a faulty transmission fluid temperature sensor, damaged wiring or connectors, low transmission fluid levels, or a malfunctioning transmission control module.
3. How can I diagnose the Transmission Fluid Temperature Sensor Intermittent issue in my Jeep?
- Use an OBDII scanner to retrieve the specific fault code, visually inspect the sensor and its wiring for any visible damage, and test the sensor's resistance and voltage to determine if it is functioning correctly.
4. Can I continue driving my Jeep with OBDII code P0714 triggered?
- It is not recommended to drive the vehicle with this code active, as it can lead to further transmission damage and potentially unsafe driving conditions.
5. How can I repair the Transmission Fluid Temperature Sensor Intermittent issue in my Jeep?
- Repair options include replacing the faulty sensor, repairing damaged wiring or connectors, topping up transmission fluid levels, and resetting the fault code with an OBDII scanner.
6. Is it possible to reset OBDII code P0714 in a Jeep without fixing the underlying issue?
- While you can clear the code temporarily with an OBDII scanner, the issue will likely reoccur if the root cause is not addressed.
7. How much does it typically cost to repair OBDII code P0714 related to the Transmission Fluid Temperature Sensor Intermittent in a Jeep?
- The cost of repair can vary depending on the specific cause, but it may range from $100 to $300 for parts and labor.
8. Can a DIY enthusiast fix OBDII code P0714 in a Jeep themselves?
- Depending on their skill level, DIY enthusiasts may be able to replace the sensor or repair wiring issues themselves. However, complex transmission repairs may require professional assistance.
9. Are there any preventive maintenance tips to avoid triggering OBDII code P0714 in a Jeep?
- Regularly checking transmission fluid levels and quality, addressing any leaks promptly, and ensuring proper maintenance of the transmission system can help prevent issues leading to this fault code.
10. How long does it typically take to repair OBDII code P0714 related to the Transmission Fluid Temperature Sensor Intermittent in a Jeep?
- The repair time can vary based on the specific cause and the complexity of the repair, but it may take anywhere from 1 to 3 hours at a repair shop.
Discuss the causes and fixes for P0714 Jeep OBDII Code
Code P0714 Jeep comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
