P0713 KIA Code - Transmission Fluid Temperature Sensor High Input
Quick Answer
The Automatic Transmission Fluid (ATF) temperature sensor is installed in the Valve Body. Common causes include Faulty Transmission Fluid Temperature Sensor, Transmission Fluid Temperature Sensor harness is open or shorted, Transmission Fluid Temperature Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0713 KIA indicates Transmission Fluid Temperature Sensor High Input.
- Common causes
- Common causes include Faulty Transmission Fluid Temperature Sensor, Transmission Fluid Temperature Sensor harness is open or shorted, Transmission Fluid Temperature Sensor circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0713 KIA Description
What are the Possible Causes of the DTC P0713 KIA?
- Faulty Transmission Fluid Temperature Sensor
- Transmission Fluid Temperature Sensor harness is open or shorted
- Transmission Fluid Temperature Sensor circuit poor electrical connection
How to Fix the DTC P0713 KIA?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0713 KIA code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0713 KIA code?
Need more information on how to fix the P0713 KIA code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0713 KIA code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0713 KIA Code
1. What does the OBDII code P0713 mean on a KIA?
P0713 indicates that the transmission fluid temperature sensor is reporting a higher-than-expected voltage signal, suggesting an issue with the sensor or its circuit.
2. What are the common symptoms of code P0713 in a KIA?
Symptoms may include delayed or harsh shifting, transmission overheating, poor fuel economy, the check engine light turning on, or the vehicle entering limp mode.
3. What causes the P0713 code in a KIA?
Common causes include a faulty transmission fluid temperature sensor, damaged wiring or connectors, low or dirty transmission fluid, or issues with the powertrain control module (PCM).
4. Can I drive my KIA with a P0713 code?
While the vehicle may still be drivable, driving with this code can cause further damage to the transmission if overheating occurs. It’s best to address the issue as soon as possible.
5. How do I diagnose the P0713 code on my KIA?
Start by using a scan tool to confirm the code, inspect the wiring and connectors for damage, check the transmission fluid level and condition, and test the temperature sensor for proper resistance values.
6. How do I fix the P0713 code on a KIA?
Repairs may include replacing the transmission fluid temperature sensor, repairing or replacing damaged wiring, cleaning connectors, or performing a transmission fluid change.
7. How much does it cost to fix a P0713 code on a KIA?
Repair costs can vary but typically range from $150 to $300, depending on whether the sensor needs replacement or if additional wiring repairs are required.
8. Can low transmission fluid cause the P0713 code?
Yes, low or contaminated transmission fluid can cause erratic temperature readings, leading to the P0713 code.
9. Does a P0713 code always mean the sensor is bad?
No, the issue could also stem from damaged wiring, connector problems, or even a malfunctioning PCM. Proper diagnosis is essential.
10. Will clearing the P0713 code fix the problem on my KIA?
Clearing the code won’t fix the underlying issue. If the root cause isn’t addressed, the code will likely return.
Discuss the causes and fixes for P0713 KIA OBDII Code
Code P0713 KIA comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
