AutoCodesToyota – P0713 2013 Toyota RAV4

P0713 2013 Toyota RAV4 Code - Transmission Fluid Temperature Sensor 'A' High Input

Quick Answer

The Automatic Transmission Fluid (ATF) Temperature Sensor converts the fluid temperature into a resistance value for use by the Engine Control Module (ECM). Common causes include Faulty Automatic Transmission Fluid (ATF) Temperature Sensor, Automatic Transmission Fluid Temperature Sensor harness is open or shorted, Automatic Transmission Fluid Temperature Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
P0713 2013 Toyota RAV4 indicates Transmission Fluid Temperature Sensor 'A' High Input.
Common causes
Common causes include Faulty Automatic Transmission Fluid (ATF) Temperature Sensor, Automatic Transmission Fluid Temperature Sensor harness is open or shorted, Automatic Transmission Fluid Temperature Sensor circuit poor electrical connection.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
AI answers can be wrong. Verify repairs with testing. Open full chat
Code Popularity 787
How popular is this code, among other codes? Low
Table of contents Created and updated by William Orellana on Sep 11, 2022
💬 Need more help? Ask Coddy for instant answers — it's free!

Code P0713 2013 Toyota RAV4 Description

The Automatic Transmission Fluid (ATF) Temperature Sensor converts the fluid temperature into a resistance value for use by the Engine Control Module (ECM). The ECM applies a voltage to the temperature sensor. The sensor resistance changes with the ATF temperature. As the temperature becomes higher, the sensor resistance decreases. One terminal of the sensor is grounded so that the sensor resistance decreases, and the voltage goes down as the temperature increases. The ECM calculates the fluid temperature based on the voltage signal.
This Diagnostic Trouble Code (DTC) indicates an open or short in the ATF temperature sensor circuit. The ATF temperature sensor converts ATF temperature into an electrical resistance value. Based on the resistance, the ECM determines the ATF temperature, and the ECM detects an open or short in the ATF temperature circuit. If the resistance value of the ATF temperature is below 79 Ω*1 or higher than 156 kΩ*2, the ECM interprets this as a fault in the ATF sensor or wiring. The ECM will turn on the MIL and store the DTC.
OBDII Code P0713 2013 Toyota RAV4 - Transmission Fluid Temperature Sensor 'A' High Input - AutoCodes.com
P0713 2013 Toyota RAV4 Code - Transmission Fluid Temperature Sensor 'A' High Input

What are the Possible Causes of the DTC P0713 2013 Toyota RAV4?

  • Faulty Automatic Transmission Fluid (ATF) Temperature Sensor
  • Automatic Transmission Fluid Temperature Sensor harness is open or shorted
  • Automatic Transmission Fluid Temperature Sensor circuit poor electrical connection
  • Faulty Engine Control Module (ECM)

How to Fix the DTC P0713 2013 Toyota RAV4?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P0713 2013 Toyota RAV4 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P0713 2013 Toyota RAV4 code?

Need more information on how to fix the P0713 2013 Toyota RAV4 code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0713 2013 Toyota RAV4 code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0713 2013 Toyota RAV4 Code

What does the OBDII code P0713 mean for a 2013 Toyota RAV4?

P0713 indicates a high input signal from the transmission fluid temperature sensor 'A', which can suggest an issue with the sensor or the transmission fluid temperature monitoring system.

What are the common symptoms of the P0713 code?

Common symptoms include transmission overheating, erratic shifting, poor fuel economy, and potentially the illumination of the check engine light.

What could cause the P0713 code to trigger?

Possible causes include a faulty transmission fluid temperature sensor, damaged wiring or connectors, low transmission fluid levels, or issues with the transmission control module (TCM).

How can I diagnose the P0713 code?

To diagnose the P0713 code, check the transmission fluid level, inspect the wiring and connectors to the temperature sensor, test the sensor for proper operation, and scan for additional error codes that may provide further insights.

What are some common repairs for the P0713 code?

Common repairs include replacing the faulty transmission fluid temperature sensor, repairing damaged wiring or connectors, and ensuring the transmission fluid is at the correct level and in good condition.

Can driving with the P0713 code cause damage to my vehicle?

Yes, driving with this code can lead to transmission overheating and further damage, as the transmission may not operate efficiently without accurate temperature readings.

How much does it typically cost to fix the P0713 code?

Repair costs can vary widely depending on the cause, but replacing a transmission fluid temperature sensor usually ranges from $100 to $300, including parts and labor.

Is it safe to drive my 2013 Toyota RAV4 with the P0713 code?

It is generally not recommended to drive the vehicle until the issue is resolved, as it can lead to transmission damage or failure due to overheating.

Should I reset the check engine light after fixing the P0713 code?

Yes, after addressing the underlying issue and performing the necessary repairs, you should reset the check engine light to ensure the code does not return and to verify that the problem is resolved.

Discuss the causes and fixes for P0713 2013 Toyota RAV4 OBDII Code

Code P0713 2013 Toyota RAV4 comments

No comments found for this page.

AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play