P0707 Hyundai Code - Transmission Range Switch Open Circuit
Quick Answer
The park/neutral position (PNP) switch includes a transmission range switch. Common causes include Faulty Park/neutral position switch, Misadjusted park/neutral position switch, Park/neutral position switch harness is open or shorted. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0707 Hyundai indicates Transmission Range Switch Open Circuit.
- Common causes
- Common causes include Faulty Park/neutral position switch, Misadjusted park/neutral position switch, Park/neutral position switch harness is open or shorted.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0707 Hyundai Description
What are the Possible Causes of the DTC P0707 Hyundai?
- Faulty Park/neutral position switch
- Misadjusted park/neutral position switch
- Park/neutral position switch harness is open or shorted
- Park/neutral position switch circuit poor electrical connection
How to Fix the DTC P0707 Hyundai?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
Code Tech Notes
1. Place the selector lever in the "N" (Neutral) position.
2. Loosen the manual control lever lock nut to separate the cable and lever.
3. Place the manual control lever in the "N" (Neutral) position.
4. Turn the transaxle range switch body until the 12 mm (.47 in.) wide end of the manual control lever aligns with the switch body flange [12 mm (0.472 in.) wide portion].
5. Tighten the attaching bolts (2 pcs.) to the specified torque. When setting up the switch body, be careful O-ring does not drop from the switch body. Tighten the attaching bolts carefully.
6. Make sure that the selector lever is in the "N" (Neutral) position.
7. Adjust the flange nut so that there is no slack in the control cable and make sure that the selector lever operates smoothly.
8. Run the vehicle and confirm that the transaxle is set in each range when the selector lever is shifted to each position.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0707 Hyundai code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0707 Hyundai code?
Need more information on how to fix the P0707 Hyundai code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0707 Hyundai code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0707 Hyundai Code
1. What does OBDII code P0707 mean on a Hyundai?
Code P0707 indicates a problem with the Transmission Range Sensor (TRS), specifically an open circuit or low input signal.
2. What are the symptoms of a P0707 code in a Hyundai vehicle?
Common symptoms include difficulty shifting gears, the vehicle stuck in a single gear, the transmission going into limp mode, and the illumination of the Check Engine Light.
3. What causes the P0707 code in a Hyundai?
Typical causes include a faulty Transmission Range Sensor, damaged wiring or connectors in the TRS circuit, or a malfunctioning transmission control module (TCM).
4. Can I drive my Hyundai with a P0707 code?
Driving with a P0707 code is not recommended, as it can lead to transmission malfunctions that may cause further damage or unsafe driving conditions.
5. How do I diagnose a P0707 code on a Hyundai?
Diagnosis typically involves scanning the vehicle with an OBDII tool, inspecting the TRS and its wiring for damage, checking the sensor’s electrical signals, and testing the TCM if needed.
6. How is the P0707 code fixed in a Hyundai?
Repairs may include replacing the Transmission Range Sensor, repairing or replacing damaged wiring or connectors, or reprogramming or replacing the TCM.
7. What tools are needed to diagnose and repair code P0707?
An OBDII scanner, a multimeter to test electrical circuits, and basic hand tools for sensor or wiring replacement are typically required.
8. How much does it cost to fix a P0707 code on a Hyundai?
The repair cost depends on the exact issue but typically ranges from $150 to $400, including parts and labor.
9. Can a low battery cause a P0707 code in a Hyundai?
A weak or failing battery can sometimes contribute to electrical issues, but it is not a common cause of a P0707 code.
10. Is the P0707 code a common issue in Hyundai vehicles?
While not extremely common, the P0707 code can occur in Hyundai vehicles, especially in older models with wear and tear on transmission components.
Discuss the causes and fixes for P0707 Hyundai OBDII Code
Code P0707 Hyundai comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
