P0706 Hyundai Code - Transmission Range Sensor Circuit Performance
Quick Answer
The park/neutral position (PNP) switch includes a transmission range switch. Common causes include Faulty Park/neutral position switch, Misadjusted park/neutral position switch, Park/neutral position switch harness is open or shorted. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0706 Hyundai indicates Transmission Range Sensor Circuit Performance.
- Common causes
- Common causes include Faulty Park/neutral position switch, Misadjusted park/neutral position switch, Park/neutral position switch harness is open or shorted.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0706 Hyundai Description
What are the Possible Causes of the DTC P0706 Hyundai?
- Faulty Park/neutral position switch
- Misadjusted park/neutral position switch
- Park/neutral position switch harness is open or shorted
- Park/neutral position switch circuit poor electrical connection
How to Fix the DTC P0706 Hyundai?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
Code Tech Notes
1. Place the selector lever in the "N" (Neutral) position.
2. Loosen the manual control lever lock nut to separate the cable and lever.
3. Place the manual control lever in the "N" (Neutral) position.
4. Turn the transaxle range switch body until the 12 mm (.47 in.) wide end of the manual control lever aligns with the switch body flange [12 mm (0.472 in.) wide portion].
5. Tighten the attaching bolts (2 pcs.) to the specified torque.
When setting up the switch body, be careful O-ring does not drop from the switch body. Tighten the attaching bolts carefully.
6. Make sure that the selector lever is in the "N" (Neutral) position.
7. Adjust the flange nut so that there is no slack in the control cable and make sure that the selector lever operates smoothly.
8. Run the vehicle and confirm that the transaxle is set in each range when the selector lever is shifted to each position.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0706 Hyundai code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0706 Hyundai code?
Need more information on how to fix the P0706 Hyundai code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0706 Hyundai code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0706 Hyundai Code
1. What are the common symptoms of OBDII code P0706 in a Hyundai related to the Transmission Range Sensor Circuit Performance?
- Common symptoms include issues with shifting gears, transmission not engaging properly, and the vehicle going into "limp mode."
2. What are some possible causes of OBDII code P0706 in a Hyundai?
- Possible causes include a faulty transmission range sensor, damaged wiring or connectors in the circuit, or a malfunctioning PCM.
3. How can I diagnose the Transmission Range Sensor Circuit Performance issue causing OBDII code P0706 in my Hyundai?
- You can diagnose the issue by conducting a visual inspection of the wiring and connectors, testing the transmission range sensor with a multimeter, and checking for any loose connections.
4. Can I still drive my Hyundai with OBDII code P0706 present?
- It is not recommended to drive the vehicle with this code as it can lead to further transmission problems and potential safety hazards.
5. How can I fix OBDII code P0706 in my Hyundai related to the Transmission Range Sensor Circuit Performance?
- The most common fix is to replace the transmission range sensor, ensuring proper installation and calibration, and then clearing the code with an OBDII scanner.
6. Are there any DIY repair tips for addressing OBDII code P0706 in a Hyundai?
- DIY repair tips include checking for any visible damage to the wiring, cleaning the connectors, and following the manufacturer's guidelines for replacing the transmission range sensor.
7. How much does it typically cost to repair OBDII code P0706 in a Hyundai at a professional mechanic or dealership?
- The cost can vary depending on the exact cause of the issue, but generally, the repair cost can range from $200 to $500, including parts and labor.
8. Can resetting the OBDII code P0706 in a Hyundai fix the issue temporarily?
- Resetting the code may temporarily clear the warning light, but it will not fix the underlying problem with the Transmission Range Sensor Circuit Performance.
9. Is it necessary to visit a dealership for diagnosis and repair of OBDII code P0706 in a Hyundai?
- While a dealership may have specialized knowledge and tools, a qualified independent mechanic can also diagnose and repair the issue effectively.
10. Are there any recalls or service bulletins related to OBDII code P0706 in Hyundai vehicles?
- It's recommended to check with a Hyundai dealership or visit the National Highway Traffic Safety Administration (NHTSA) website for any relevant recalls or service bulletins related to this issue.
Discuss the causes and fixes for P0706 Hyundai OBDII Code
Code P0706 Hyundai comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
