P0705 Jeep Code - Transmission Range Sensor Circuit Malfunction
Quick Answer
The park/neutral position (PNP) switch includes a transmission range switch. Common causes include Faulty Park/Neutral Position Switch, Misadjusted Park/Neutral Position Switch, Park/Neutral Position Switch harness is open or shorted. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0705 Jeep indicates Transmission Range Sensor Circuit Malfunction.
- Common causes
- Common causes include Faulty Park/Neutral Position Switch, Misadjusted Park/Neutral Position Switch, Park/Neutral Position Switch harness is open or shorted.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0705 Jeep Description
What are the Possible Causes of the DTC P0705 Jeep?
- Faulty Park/Neutral Position Switch
- Misadjusted Park/Neutral Position Switch
- Park/Neutral Position Switch harness is open or shorted
- Park/Neutral Position Switch circuit poor electrical connection
How to Fix the DTC P0705 Jeep?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0705 Jeep code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0705 Jeep code?
Need more information on how to fix the P0705 Jeep code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0705 Jeep code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0705 Jeep Code
1. What are the common symptoms of OBDII code P0705 in a Jeep related to the Transmission Range Sensor Circuit Malfunction?
Common symptoms include difficulty shifting gears, incorrect gear selection displayed on the dashboard, vehicle stalling, and the inability to start the engine.
2. What are the possible causes of the P0705 code in a Jeep?
The P0705 code in a Jeep can be caused by a faulty transmission range sensor, damaged wiring or connectors in the circuit, low transmission fluid levels, or a malfunctioning transmission control module.
3. How can I diagnose the Transmission Range Sensor Circuit Malfunction in my Jeep?
To diagnose the issue, you can use an OBDII scanner to retrieve the trouble code P0705. Additionally, inspect the transmission range sensor, check the wiring and connectors for any damage, and ensure the transmission fluid levels are adequate.
4. Can I drive my Jeep with the P0705 code present?
It is not recommended to drive your Jeep with the P0705 code present, as it can lead to further transmission damage or safety hazards. It is best to address the issue promptly to avoid potential complications.
5. How do I repair the Transmission Range Sensor Circuit Malfunction in my Jeep?
Repairing the P0705 code may involve replacing the transmission range sensor, repairing damaged wiring or connectors, ensuring proper transmission fluid levels, or reprogramming the transmission control module.
6. Will resetting the OBDII code P0705 in my Jeep fix the issue?
Simply resetting the code may temporarily clear the warning light, but it will not fix the underlying problem causing the P0705 code. It is important to diagnose and repair the issue to prevent it from recurring.
7. Can a DIY enthusiast fix the P0705 code in a Jeep?
Depending on your experience and tools available, some DIY enthusiasts may be able to address the P0705 code by replacing the transmission range sensor or repairing wiring issues. However, complex transmission-related repairs may require professional assistance.
8. How much does it typically cost to repair the P0705 code in a Jeep?
The cost of repairing the P0705 code in a Jeep can vary depending on the root cause of the issue, parts needed, and labor costs. On average, the repair cost can range from $150 to $500 or more.
9. Are there any preventative maintenance tips to avoid the P0705 code in a Jeep?
To prevent the P0705 code in your Jeep, it is advisable to regularly check and maintain the transmission system, including ensuring proper fluid levels, inspecting wiring for damage, and promptly addressing any shifting issues.
10. Can the P0705 code be triggered intermittently in a Jeep?
Yes, the P0705 code can be triggered intermittently in a Jeep, especially if the issue is related to a loose connection or sporadic sensor failure. It is essential to address intermittent occurrences promptly to prevent further complications.
Discuss the causes and fixes for P0705 Jeep OBDII Code
Code P0705 Jeep comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
