P0705 2016 Toyota RAV4 Code - Transmission Range Sensor Circuit Malfunction
Quick Answer
These Diagnostic Trouble Codes (DTC) indicate a problem with the Park/Neutral Position (PNP) Switch assembly and the wire harness in the Park/Neutral Position Switch assembly circuit. Common causes include Faulty Park/Neutral Position Switch, Misadjusted Park/Neutral Position Switch, Park/Neutral Position Switch harness is open or shorted. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0705 2016 Toyota RAV4 indicates Transmission Range Sensor Circuit Malfunction.
- Common causes
- Common causes include Faulty Park/Neutral Position Switch, Misadjusted Park/Neutral Position Switch, Park/Neutral Position Switch harness is open or shorted.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0705 2016 Toyota RAV4 Description
The Park/Neutral Position Switch assembly detects the shift lever position and sends signals to the Engine Control Module (ECM).
For safety, the Park/Neutral Position Switch assembly detects the shift lever position so that the engine can be started only when the shift lever is in P or N.
The Park/Neutral Position Switch assembly sends a signal to the ECM according to the shift lever position (P, N, NSW, R, D or S). The ECM determines that there is a problem with the switch or related parts if it receives more than 1 position signal simultaneously. The ECM will turn on the MIL and store the DTC.
What are the Possible Causes of the DTC P0705 2016 Toyota RAV4?
- Faulty Park/Neutral Position Switch
- Misadjusted Park/Neutral Position Switch
- Park/Neutral Position Switch harness is open or shorted
- Park/Neutral Position Switch circuit poor electrical connection
- Faulty Engine Control Module (ECM)
How to Fix the DTC P0705 2016 Toyota RAV4?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0705 2016 Toyota RAV4 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0705 2016 Toyota RAV4 code?
Need more information on how to fix the P0705 2016 Toyota RAV4 code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0705 2016 Toyota RAV4 code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0705 2016 Toyota RAV4 Code
1. What are the common symptoms of OBDII code P0705 in a 2016 Toyota RAV4?
- Common symptoms include difficulty shifting gears, erratic shifting behavior, stalling when shifting into gear, and the Check Engine light coming on.
2. What does OBDII code P0705 indicate in a 2016 Toyota RAV4?
- OBDII code P0705 in a 2016 Toyota RAV4 indicates a Transmission Range Sensor Circuit Malfunction.
3. What are the possible causes of OBDII code P0705 in a 2016 Toyota RAV4?
- Possible causes include a faulty transmission range sensor, damaged wiring or connectors, a corroded sensor connection, or issues with the transmission control module.
4. How can I diagnose the cause of OBDII code P0705 in my 2016 Toyota RAV4?
- Diagnosing the issue involves conducting a thorough inspection of the transmission range sensor, checking the wiring and connectors for damage, and using a diagnostic scanner to retrieve specific error codes.
5. Can I drive my 2016 Toyota RAV4 with OBDII code P0705?
- It is not recommended to drive your vehicle with OBDII code P0705 as it can lead to further transmission issues and potential safety risks. It is advisable to address the problem promptly.
6. How can I repair OBDII code P0705 in my 2016 Toyota RAV4?
- Repair options include replacing the transmission range sensor, repairing damaged wiring or connectors, cleaning corroded connections, or reprogramming the transmission control module.
7. Is it necessary to reset the OBDII code P0705 after repairs in a 2016 Toyota RAV4?
- Yes, it is important to reset the OBDII code P0705 after making repairs to clear the error code and ensure proper functioning of the transmission range sensor.
8. Can a DIY enthusiast fix OBDII code P0705 in a 2016 Toyota RAV4?
- While some basic repairs like checking connections or cleaning sensors can be done by DIY enthusiasts, diagnosing and repairing complex issues related to OBDII code P0705 may require professional expertise.
9. How much does it cost to repair OBDII code P0705 in a 2016 Toyota RAV4?
- The cost of repairing OBDII code P0705 can vary depending on the specific issue, parts needed, and labor costs. It is advisable to get a diagnosis from a professional technician for an accurate estimate.
10. How can I prevent OBDII code P0705 from occurring in my 2016 Toyota RAV4?
- To prevent OBDII code P0705, it is important to regularly maintain your vehicle, address any transmission issues promptly, and avoid harsh driving habits that can strain the transmission range sensor.
Discuss the causes and fixes for P0705 2016 Toyota RAV4 OBDII Code
Code P0705 2016 Toyota RAV4 comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
