P0705 2015 Toyota RAV4 Code - Transmission Range Sensor Circuit Malfunction
Quick Answer
These Diagnostic Trouble Codes (DTC) indicate a problem with the Park/Neutral Position (PNP) Switch assembly and the wire harness in the Park/Neutral Position Switch assembly circuit. Common causes include Faulty Park/Neutral Position Switch, Misadjusted Park/Neutral Position Switch, Park/Neutral Position Switch harness is open or shorted. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0705 2015 Toyota RAV4 indicates Transmission Range Sensor Circuit Malfunction.
- Common causes
- Common causes include Faulty Park/Neutral Position Switch, Misadjusted Park/Neutral Position Switch, Park/Neutral Position Switch harness is open or shorted.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0705 2015 Toyota RAV4 Description
The Park/Neutral Position Switch assembly detects the shift lever position and sends signals to the Engine Control Module (ECM).
For safety, the Park/Neutral Position Switch assembly detects the shift lever position so that the engine can be started only when the shift lever is in P or N.
The Park/Neutral Position Switch assembly sends a signal to the ECM according to the shift lever position (P, N, NSW, R, D or S). The ECM determines that there is a problem with the switch or related parts if it receives more than 1 position signal simultaneously. The ECM will turn on the MIL and store the DTC.
What are the Possible Causes of the DTC P0705 2015 Toyota RAV4?
- Faulty Park/Neutral Position Switch
- Misadjusted Park/Neutral Position Switch
- Park/Neutral Position Switch harness is open or shorted
- Park/Neutral Position Switch circuit poor electrical connection
- Faulty Engine Control Module (ECM)
How to Fix the DTC P0705 2015 Toyota RAV4?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0705 2015 Toyota RAV4 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0705 2015 Toyota RAV4 code?
Need more information on how to fix the P0705 2015 Toyota RAV4 code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0705 2015 Toyota RAV4 code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0705 2015 Toyota RAV4 Code
1. What does the OBDII code P0705 mean on a 2015 Toyota RAV4?
P0705 indicates a Transmission Range Sensor Circuit Malfunction, meaning the vehicle's ECU is receiving incorrect or no information about the gear selector position.
2. What are the symptoms of code P0705 in a 2015 Toyota RAV4?
Symptoms may include the check engine light turning on, difficulty shifting gears, the transmission staying in limp mode, or incorrect gear indicator display.
3. What causes the P0705 code in a 2015 Toyota RAV4?
Common causes include a faulty transmission range sensor, damaged wiring or connectors, or a misaligned sensor due to wear or improper installation.
4. Can I drive my 2015 Toyota RAV4 with a P0705 code?
Driving with a P0705 code is not recommended, as it may lead to erratic shifting, reduced performance, or further damage to the transmission.
5. How do I fix the P0705 code in my 2015 Toyota RAV4?
Repairs may involve replacing the transmission range sensor, repairing damaged wiring, or realigning the sensor. A proper diagnosis is crucial to determine the exact cause.
6. Where is the transmission range sensor located on a 2015 Toyota RAV4?
The transmission range sensor is typically located on the side of the transmission, near the shift linkage.
7. How much does it cost to repair a P0705 code on a 2015 Toyota RAV4?
Repair costs can range from $150 to $400 or more, depending on whether the sensor needs replacement or if additional wiring repairs are required.
8. Can a bad battery cause the P0705 code on a 2015 Toyota RAV4?
A weak or failing battery is unlikely to cause this specific code, but electrical issues in the vehicle could contribute to sensor malfunctions.
9. How do I reset the P0705 code after repairs on a 2015 Toyota RAV4?
The code can be reset by using an OBDII scanner to clear the fault, though it’s important to ensure the issue is resolved to prevent the code from returning.
10. What tools are needed to diagnose a P0705 code on a 2015 Toyota RAV4?
You’ll need an OBDII scanner to retrieve the code, a multimeter to check wiring and sensor continuity, and basic hand tools for inspection or replacement.
Discuss the causes and fixes for P0705 2015 Toyota RAV4 OBDII Code
Code P0705 2015 Toyota RAV4 comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
