P0704 2001 Ford F150 Code - Clutch Pedal Position Switch Malfunction
Quick Answer
When the clutch pedal is depress the voltage signal from the clutch switch to the Engine Control Module (ECM) is low. Common causes include Faulty Clutch Switch, Misadjusted Clutch Switch, Clutch Switch harness is open or shorted. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0704 2001 Ford F150 indicates Clutch Pedal Position Switch Malfunction .
- Common causes
- Common causes include Faulty Clutch Switch, Misadjusted Clutch Switch, Clutch Switch harness is open or shorted.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0704 2001 Ford F150 Description
What are the Possible Causes of the DTC P0704 2001 Ford F150?
- Faulty Clutch Switch
- Misadjusted Clutch Switch
- Clutch Switch harness is open or shorted
- Clutch Switch circuit poor electrical connection
- Faulty Engine Control Module (ECM)
How to Fix the DTC P0704 2001 Ford F150?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
Code Tech Notes
When the clutch pedal is depressed the voltage goes to low. If the PCM does not see this change from high to low the DTC is set.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0704 2001 Ford F150 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0704 2001 Ford F150 code?
Need more information on how to fix the P0704 2001 Ford F150 code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0704 2001 Ford F150 code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0704 2001 Ford F150 Code
What does the OBDII code P0704 mean on a 2001 Ford F150?
P0704 indicates a malfunction in the clutch pedal position (CPP) switch, which monitors the position of the clutch pedal and communicates with the vehicle's computer.
What are the symptoms of a P0704 code in a 2001 Ford F150?
Common symptoms include difficulty starting the engine, the clutch pedal not engaging properly, or no noticeable symptoms at all other than the check engine light being illuminated.
What causes the P0704 code to appear?
The code can be triggered by a faulty clutch pedal position switch, damaged or corroded wiring, a disconnected electrical connector, or issues with the vehicle’s powertrain control module (PCM).
Can I drive my 2001 Ford F150 with a P0704 code?
While it may still be drivable, the code indicates a potential safety issue, especially if the clutch pedal position switch affects starting or prevents proper clutch operation. It's best to address the issue promptly.
How do I diagnose a P0704 code?
Start by visually inspecting the clutch pedal position switch, connectors, and wiring for signs of damage or corrosion. Use a multimeter to test the switch for proper operation and check for any related trouble codes.
How do I fix the P0704 code on a 2001 Ford F150?
Repairs may involve replacing the clutch pedal position switch, repairing or replacing damaged wiring, cleaning corroded connections, or reprogramming the PCM if necessary.
How much does it cost to fix a P0704 code?
Replacing a clutch pedal position switch typically costs $50–$150 for the part, with additional labor charges if done professionally. Wiring repairs may vary depending on complexity.
Is the P0704 code specific to manual transmission vehicles?
Yes, the P0704 code applies only to vehicles with manual transmissions since it relates to the clutch pedal position switch.
Can a faulty clutch pedal position switch cause starting problems?
Yes, if the clutch pedal position switch is faulty, it may prevent the engine from starting as it signals the PCM that the clutch is not fully engaged.
Do I need to clear the code manually after repairs?
In most cases, the code will clear automatically after the issue is resolved, but you can use an OBDII scanner to clear it manually if necessary.
Discuss the causes and fixes for P0704 2001 Ford F150 OBDII Code
Code P0704 2001 Ford F150 comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
