P0704 2000 Ford F150 Code - Clutch Pedal Position Switch Malfunction
Quick Answer
When the clutch pedal is depress the voltage signal from the clutch switch to the Engine Control Module (ECM) is low. Common causes include Faulty Clutch Switch, Misadjusted Clutch Switch, Clutch Switch harness is open or shorted. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0704 2000 Ford F150 indicates Clutch Pedal Position Switch Malfunction .
- Common causes
- Common causes include Faulty Clutch Switch, Misadjusted Clutch Switch, Clutch Switch harness is open or shorted.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0704 2000 Ford F150 Description
What are the Possible Causes of the DTC P0704 2000 Ford F150?
- Faulty Clutch Switch
- Misadjusted Clutch Switch
- Clutch Switch harness is open or shorted
- Clutch Switch circuit poor electrical connection
- Faulty Engine Control Module (ECM)
How to Fix the DTC P0704 2000 Ford F150?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
Code Tech Notes
When the clutch pedal is depressed the voltage goes to low. If the PCM does not see this change from high to low the DTC is set.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0704 2000 Ford F150 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0704 2000 Ford F150 code?
Need more information on how to fix the P0704 2000 Ford F150 code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0704 2000 Ford F150 code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0704 2000 Ford F150 Code
1. What are common symptoms of a clutch pedal position switch malfunction (OBDII code P0704) in a 2000 Ford F150?
- Common symptoms include difficulty starting the vehicle, the inability to start the vehicle at all, cruise control not working, and the inability to disengage the cruise control.
2. What causes the clutch pedal position switch malfunction (OBDII code P0704) in a 2000 Ford F150?
- The malfunction is often caused by a faulty or misadjusted clutch pedal position switch, which can lead to incorrect signals being sent to the vehicle's computer.
3. How can I diagnose a clutch pedal position switch malfunction (OBDII code P0704) in my 2000 Ford F150?
- Use an OBDII scanner to retrieve the trouble code P0704, then visually inspect the clutch pedal position switch for any damage or misalignment.
4. Can I drive my 2000 Ford F150 with the clutch pedal position switch malfunction (OBDII code P0704)?
- It is not recommended to drive the vehicle with this malfunction as it can lead to issues with starting the vehicle and potentially affect the vehicle's performance.
5. How do I repair a clutch pedal position switch malfunction (OBDII code P0704) in my 2000 Ford F150?
- The repair typically involves replacing the faulty clutch pedal position switch with a new one and ensuring it is properly adjusted to prevent future issues.
6. Is it possible to reset the OBDII code P0704 in a 2000 Ford F150 without fixing the underlying issue?
- While you can clear the trouble code using an OBDII scanner, it is important to address the root cause of the issue to prevent further problems.
7. Can a DIY enthusiast replace the clutch pedal position switch in a 2000 Ford F150 to fix OBDII code P0704?
- Yes, replacing the clutch pedal position switch can be a DIY project for those with mechanical skills and the necessary tools. However, if unsure, it's best to consult a professional mechanic.
8. Are there any preventive measures to avoid a clutch pedal position switch malfunction (OBDII code P0704) in a 2000 Ford F150?
- Regularly inspecting and maintaining the clutch pedal position switch, as well as ensuring it is properly adjusted, can help prevent malfunctions and potential issues.
9. How long does it typically take to replace a clutch pedal position switch in a 2000 Ford F150?
- The replacement process can vary depending on the individual's experience and tools available, but it generally takes around 1-2 hours to complete.
10. Will a clutch pedal position switch malfunction (OBDII code P0704) cause the check engine light to illuminate in a 2000 Ford F150?
- Yes, a malfunctioning clutch pedal position switch can trigger the check engine light to come on, signaling the need for diagnostic attention.
Discuss the causes and fixes for P0704 2000 Ford F150 OBDII Code
Code P0704 2000 Ford F150 comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
