P0700 Subaru Code - Transmission Control System Malfunction
Quick Answer
The Transmission Control Module (TCM) monitors the malfunction of sensors and actuators relating to transmission control. Common causes include Shorted or open circuit within Transmission Control Module (TCM), Faulty Transmission Control Module (TCM). Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0700 Subaru indicates Transmission Control System Malfunction.
- Common causes
- Common causes include Shorted or open circuit within Transmission Control Module (TCM), Faulty Transmission Control Module (TCM).
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0700 Subaru Description
What are the Possible Causes of the DTC P0700 Subaru?
- Shorted or open circuit within Transmission Control Module (TCM)
- Faulty Transmission Control Module (TCM)
How to Fix the DTC P0700 Subaru?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
Code Tech Notes
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0700 Subaru code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0700 Subaru code?
Need more information on how to fix the P0700 Subaru code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0700 Subaru code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0700 Subaru Code
1. What does the OBDII code P0700 on my Subaru mean?
The P0700 code indicates a transmission control system malfunction in your Subaru.
2. What are some common symptoms of a P0700 code in a Subaru?
Common symptoms include issues shifting gears, hesitation or slipping during acceleration, and illuminated warning lights on the dashboard.
3. What are the possible causes of the P0700 code in a Subaru?
Potential causes can include faulty transmission control module (TCM), damaged wiring or connectors, low transmission fluid levels, or internal transmission problems.
4. How can I diagnose the cause of a P0700 code in my Subaru?
Diagnosis typically involves using a diagnostic scanner to retrieve any related trouble codes, conducting a visual inspection of wiring and connectors, and checking transmission fluid levels and condition.
5. Can I continue driving my Subaru with a P0700 code?
It is not recommended to continue driving with a P0700 code, as it can lead to further transmission damage and potentially unsafe driving conditions.
6. How can I repair a P0700 code in my Subaru?
Repair steps may include addressing any underlying issues causing the code, such as replacing a faulty TCM, repairing damaged wiring, performing a transmission fluid flush, or conducting necessary transmission repairs.
7. Are there any DIY tips for fixing a P0700 code in a Subaru?
While some basic checks like inspecting wiring and connectors can be done by DIY enthusiasts, complex repairs involving the transmission system are best left to professional mechanics.
8. How much does it typically cost to repair a P0700 code in a Subaru?
The cost of repairs for a P0700 code can vary widely depending on the specific cause and needed repairs, ranging from a few hundred dollars for minor fixes to over a thousand dollars for major transmission repairs.
9. Can a P0700 code be related to other codes in a Subaru?
Yes, the P0700 code often accompanies specific transmission-related trouble codes that provide more detailed information about the nature of the malfunction.
10. How can I prevent a P0700 code from occurring in my Subaru?
Regular maintenance, such as checking and changing transmission fluid as recommended, can help prevent issues that may trigger a P0700 code in your Subaru.
Discuss the causes and fixes for P0700 Subaru OBDII Code
-
Check engine light is on. Cruise light is flashing. Stalls( more so when in reverse). Shifts hard between 2nd and 3rd gear.
-
Bro mine is doing the same thing, but doesn't stall, did you ever find a solution??
-
Drain transmission....check lock up valve.....replace if needed then replace trans fluid filter and fluid.
-
I fund the transmission presure switch broke plug connector i replace the transmission pressure switch to solve that problem.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
