P0700 Acura Code - Automatic Transmission Fault
Quick Answer
The Transmission Control Module (TCM) monitors the malfunction of sensors and actuators relating to transmission control. Common causes include Shorted or open circuit within Transmission Control Module (TCM), Faulty Transmission Control Module (TCM). Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0700 Acura indicates Automatic Transmission Fault.
- Common causes
- Common causes include Shorted or open circuit within Transmission Control Module (TCM), Faulty Transmission Control Module (TCM).
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0700 Acura Description
What are the Possible Causes of the DTC P0700 Acura?
- Shorted or open circuit within Transmission Control Module (TCM)
- Faulty Transmission Control Module (TCM)
How to Fix the DTC P0700 Acura?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
Code Tech Notes
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0700 Acura code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0700 Acura code?
Need more information on how to fix the P0700 Acura code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0700 Acura code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0700 Acura Code
1. What are common symptoms of OBDII code P0700 in an Acura related to automatic transmission faults?
- Common symptoms include difficulty shifting gears, delayed or harsh shifting, slipping transmission, and illuminated dashboard warning lights.
2. What are the possible causes of OBDII code P0700 in an Acura?
- The code P0700 indicates a general transmission fault, which can be caused by issues such as faulty transmission control module, damaged wiring, or internal transmission problems.
3. How can I diagnose the OBDII code P0700 in my Acura at home?
- You can diagnose the code P0700 using an OBDII scanner to retrieve additional transmission-related trouble codes. However, a professional diagnosis may be required for accurate identification of the issue.
4. Can driving with the OBDII code P0700 in an Acura cause further damage to the transmission?
- Yes, driving with the code P0700 can potentially cause further damage to the transmission, leading to more severe and costly repairs if not addressed promptly.
5. What are some basic repair tips for addressing the OBDII code P0700 in an Acura?
- Basic repair tips include checking and repairing any damaged wiring, ensuring proper fluid levels and condition, and resetting the transmission control module.
6. Is it safe to continue driving my Acura with the OBDII code P0700 until I can get it repaired?
- It is not recommended to drive your Acura with the code P0700, as it can lead to further transmission issues and potential safety hazards. It's best to address the problem promptly.
7. How much does it typically cost to repair the OBDII code P0700 in an Acura?
- The cost of repairing the code P0700 can vary depending on the specific underlying issue. It's recommended to get a professional diagnosis to determine the exact repair cost.
8. Can I reset the OBDII code P0700 in my Acura using an OBDII scanner?
- Resetting the code P0700 may temporarily turn off the warning light, but it will not fix the underlying transmission issue causing the fault code.
9. Are there any preventive maintenance steps I can take to avoid the OBDII code P0700 in my Acura?
- Regularly servicing your transmission, checking fluid levels, and addressing any unusual symptoms promptly can help prevent issues that trigger the code P0700.
10. How long does it typically take to repair the OBDII code P0700 in an Acura?
- The repair time for the code P0700 can vary depending on the specific cause of the fault. Simple repairs may take a few hours, while more complex issues could require more time.
Discuss the causes and fixes for P0700 Acura OBDII Code
-
It depends what the problem is and what model year is your Acura. The P0700 code means that there is a problem with the transmission but you need to access the transmission with an scanner to find out what the problem is. Not all the scanners can access the transmission.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
