P0700 2015 GMC Sierra Code - Transmission Control Module Requested MIL Illumination
Quick Answer
The Transmission Control Module (TCM) monitors the malfunction of sensors and actuators relating to transmission control. Common causes include Check Transmission Control Module (TCM) for codes, Faulty Transmission Control Module. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0700 2015 GMC Sierra indicates Transmission Control Module Requested MIL Illumination.
- Common causes
- Common causes include Check Transmission Control Module (TCM) for codes, Faulty Transmission Control Module.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0700 2015 GMC Sierra Description
What are the Possible Causes of the DTC P0700 2015 GMC Sierra?
- Check Transmission Control Module (TCM) for codes
- Faulty Transmission Control Module
How to Fix the DTC P0700 2015 GMC Sierra?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
Code Tech Notes
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0700 2015 GMC Sierra code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0700 2015 GMC Sierra code?
Need more information on how to fix the P0700 2015 GMC Sierra code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0700 2015 GMC Sierra code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0700 2015 GMC Sierra Code
1. What does the OBDII code P0700 mean on a 2015 GMC Sierra?
P0700 indicates that the Transmission Control Module (TCM) has detected an issue and requested the Malfunction Indicator Lamp (MIL) to illuminate. It serves as a general warning, and additional codes may need to be read to pinpoint the problem.
2. What are common symptoms of the P0700 code on a 2015 GMC Sierra?
Symptoms may include the check engine light turning on, transmission shifting issues, reduced performance, or entering limp mode to protect the transmission.
3. What causes the P0700 code on a 2015 GMC Sierra?
Common causes include a faulty TCM, wiring issues, transmission solenoid failures, or internal transmission problems such as low fluid levels or worn components.
4. How do I diagnose the P0700 code on my 2015 GMC Sierra?
Start by using an advanced scan tool to retrieve additional transmission-related codes from the TCM. Inspect the wiring, connectors, and transmission fluid level for obvious issues.
5. Can I drive my 2015 GMC Sierra with the P0700 code?
It’s not recommended to drive for extended periods with the P0700 code, especially if the truck is in limp mode or experiencing shifting problems, as it could cause further transmission damage.
6. How do I fix the P0700 code on a 2015 GMC Sierra?
Repairs depend on the underlying issue. Possible fixes include repairing or replacing damaged wiring, replacing transmission solenoids, servicing the transmission fluid, or replacing the TCM if it's defective.
7. Does the P0700 code always mean the TCM is bad?
No, the P0700 code is a general alert from the TCM. The actual problem could be with the transmission, wiring, or a specific component rather than the TCM itself.
8. How much does it cost to fix the P0700 code on a 2015 GMC Sierra?
Repair costs vary widely depending on the issue. Minor repairs like fluid service or wiring fixes may cost around $100-$300, while TCM replacement or major transmission repairs could cost $500-$2,500 or more.
9. Can low transmission fluid cause the P0700 code?
Yes, low or contaminated transmission fluid can cause issues that trigger the P0700 code and other related transmission fault codes.
10. Do I need to reset the P0700 code after repairs?
Yes, after addressing the issue, you should use a scan tool to clear the code. If the problem persists, the code may reappear, indicating further diagnosis is needed.
Discuss the causes and fixes for P0700 2015 GMC Sierra OBDII Code
Code P0700 2015 GMC Sierra comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
