P06E4 Jeep Code - Control Module Wake-Up Circuit Performance
Quick Answer
The Accessory Wake Up Serial Data 2 circuit is activated by the Hybrid Powertrain Control Module 2 (HPCM2) to immediately power up other control modules connected to this circuit. Common causes include Faulty Hybrid Powertrain Control Module 2 (HPCM2), Hybrid Powertrain Control Module 2 harness is open or shorted, Hybrid Powertrain Control Module 2 circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P06E4 Jeep indicates Control Module Wake-Up Circuit Performance.
- Common causes
- Common causes include Faulty Hybrid Powertrain Control Module 2 (HPCM2), Hybrid Powertrain Control Module 2 harness is open or shorted, Hybrid Powertrain Control Module 2 circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P06E4 Jeep Description
A Diagnostic Trouble Code (DTC) is triggered when the HPCM2 detects a fault or failure in the output wake-up circuit. This malfunction can prevent the control modules from receiving the necessary wake-up signal, potentially disrupting the vehicle's communication network and affecting the operation of various systems.
What are the Possible Causes of the DTC P06E4 Jeep?
- Faulty Hybrid Powertrain Control Module 2 (HPCM2)
- Hybrid Powertrain Control Module 2 harness is open or shorted
- Hybrid Powertrain Control Module 2 circuit poor electrical connection
How to Fix the DTC P06E4 Jeep?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P06E4 Jeep code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P06E4 Jeep code?
Need more information on how to fix the P06E4 Jeep code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P06E4 Jeep code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P06E4 Jeep Code
1. What does the OBDII code P06E4 mean for a Jeep?
The code P06E4 indicates an issue with the Control Module Wake-Up Circuit Performance, which is responsible for properly activating the vehicle's control modules during startup.
2. What are the common symptoms of the P06E4 code on a Jeep?
Symptoms may include difficulty starting the vehicle, erratic electrical system behavior, or intermittent issues with various electronic modules.
3. What causes the P06E4 code on a Jeep?
Common causes include faulty wiring, a malfunctioning wake-up signal circuit, issues with the battery or alternator, or a failing control module.
4. Can a weak battery trigger the P06E4 code?
Yes, a weak or failing battery can disrupt the wake-up circuit, causing this code to appear.
5. How do I diagnose the P06E4 code on my Jeep?
Start by inspecting the wake-up circuit wiring and connections, checking the battery and alternator performance, and using a scan tool to monitor the control module signals.
6. Can the P06E4 code affect drivability?
While it may not directly impact drivability, it can lead to electrical issues that could result in starting problems or other module malfunctions.
7. How can I fix the P06E4 code on a Jeep?
Repairs may include fixing or replacing damaged wiring, ensuring proper battery and alternator operation, or replacing the faulty control module.
8. Is the P06E4 code related to other electrical codes?
Yes, it can be associated with other electrical or communication fault codes if the wake-up circuit issue affects multiple systems.
9. Can I clear the P06E4 code without repairing the issue?
Clearing the code without addressing the underlying problem may cause it to return or result in further electrical system malfunctions.
10. Should I seek professional help for the P06E4 code on my Jeep?
If you're unable to identify or repair the issue yourself, it's best to consult a professional mechanic with experience in Jeep electrical systems.
Discuss the causes and fixes for P06E4 Jeep OBDII Code
Code P06E4 Jeep comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
