P06DC 2018 GMC Sierra Code - Engine Oil Pressure Control Solenoid Valve Control Circuit High Voltage
Quick Answer
The Engine Oil Pressure Control Solenoid Valve is used to control engine oil pressure inside the mechanical engine oil pump. Common causes include Faulty Engine Oil Pressure Control Solenoid Valve, Engine Oil Pressure Control Solenoid Valve harness is open or shorted, Engine Oil Pressure Control Solenoid Valve circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P06DC 2018 GMC Sierra indicates Engine Oil Pressure Control Solenoid Valve Control Circuit High Voltage.
- Common causes
- Common causes include Faulty Engine Oil Pressure Control Solenoid Valve, Engine Oil Pressure Control Solenoid Valve harness is open or shorted, Engine Oil Pressure Control Solenoid Valve circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P06DC 2018 GMC Sierra Description
The Diagnostic Trouble Code (DTC) will be set when the control circuit's commanded state does not match the actual state for greater than 1 s.
What are the Possible Causes of the DTC P06DC 2018 GMC Sierra?
- Faulty Engine Oil Pressure Control Solenoid Valve
- Engine Oil Pressure Control Solenoid Valve harness is open or shorted
- Engine Oil Pressure Control Solenoid Valve circuit poor electrical connection
- Faulty Engine Control Module (ECM)
How to Fix the DTC P06DC 2018 GMC Sierra?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P06DC 2018 GMC Sierra code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P06DC 2018 GMC Sierra code?
Need more information on how to fix the P06DC 2018 GMC Sierra code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P06DC 2018 GMC Sierra code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P06DC 2018 GMC Sierra Code
What does the OBDII code P06DC mean on a 2018 GMC Sierra?
Code P06DC indicates an issue with the Engine Oil Pressure Control Solenoid Valve Control Circuit, specifically a high voltage condition.
What are the common symptoms of P06DC on a 2018 GMC Sierra?
Symptoms may include an illuminated check engine light, fluctuating or low oil pressure readings, poor engine performance, or unusual engine noises.
What causes the P06DC code on a 2018 GMC Sierra?
Common causes include a faulty oil pressure control solenoid, damaged wiring or connectors in the solenoid circuit, or a malfunctioning engine control module (ECM).
Can I drive my 2018 GMC Sierra with a P06DC code?
It’s not recommended to drive with this code, as it could lead to improper oil pressure, potentially causing engine damage over time.
How do I diagnose the P06DC code on a 2018 GMC Sierra?
Start by inspecting the oil pressure control solenoid, its wiring, and connectors for damage. Use a multimeter to check for proper voltage and continuity in the circuit.
Is a faulty oil pressure control solenoid the only cause of P06DC?
No, other potential causes include wiring issues, a short to power, or a failing ECM.
How much does it cost to fix a P06DC code on a 2018 GMC Sierra?
Repairs can range from $100 to $500, depending on whether the solenoid, wiring, or ECM needs replacement.
Can low engine oil cause the P06DC code?
Low oil levels can indirectly contribute to oil pressure issues but are not a direct cause of the P06DC code.
How do I reset the P06DC code after repairs?
Use an OBDII scanner to clear the code, but ensure the issue is resolved first to prevent it from returning.
What maintenance can prevent the P06DC code?
Regular oil changes with the correct oil type and proper inspection of wiring and connectors can help avoid this issue.
Discuss the causes and fixes for P06DC 2018 GMC Sierra OBDII Code
Code P06DC 2018 GMC Sierra comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
