P06DC 2017 Chevrolet Silverado Code - Engine Oil Pressure Control Solenoid Valve Control Circuit High Voltage
Quick Answer
The Engine Oil Pressure Control Solenoid Valve is used to control engine oil pressure inside the mechanical engine oil pump. Common causes include Faulty Engine Oil Pressure Control Solenoid Valve, Engine Oil Pressure Control Solenoid Valve harness is open or shorted, Engine Oil Pressure Control Solenoid Valve circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P06DC 2017 Chevrolet Silverado indicates Engine Oil Pressure Control Solenoid Valve Control Circuit High Voltage.
- Common causes
- Common causes include Faulty Engine Oil Pressure Control Solenoid Valve, Engine Oil Pressure Control Solenoid Valve harness is open or shorted, Engine Oil Pressure Control Solenoid Valve circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P06DC 2017 Chevrolet Silverado Description
The Diagnostic Trouble Code (DTC) will be set when the control circuit's commanded state does not match the actual state for greater than 1 s.
What are the Possible Causes of the DTC P06DC 2017 Chevrolet Silverado?
- Faulty Engine Oil Pressure Control Solenoid Valve
- Engine Oil Pressure Control Solenoid Valve harness is open or shorted
- Engine Oil Pressure Control Solenoid Valve circuit poor electrical connection
- Faulty Engine Control Module (ECM)
How to Fix the DTC P06DC 2017 Chevrolet Silverado?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P06DC 2017 Chevrolet Silverado code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P06DC 2017 Chevrolet Silverado code?
Need more information on how to fix the P06DC 2017 Chevrolet Silverado code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P06DC 2017 Chevrolet Silverado code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P06DC 2017 Chevrolet Silverado Code
What does the OBDII code P06DC mean for a 2017 Chevrolet Silverado?
The code P06DC indicates an issue with the Engine Oil Pressure Control Solenoid Valve Control Circuit, specifically high voltage, which affects the engine's oil pressure regulation.
What are common symptoms of the P06DC code in a 2017 Chevrolet Silverado?
Symptoms may include a check engine light, low or fluctuating oil pressure readings, reduced engine performance, or unusual engine noises.
What causes the P06DC code to be triggered?
Common causes include a faulty oil pressure control solenoid valve, damaged wiring or connectors in the solenoid circuit, or an issue with the powertrain control module (PCM).
Can I drive my 2017 Chevrolet Silverado with the P06DC code active?
It’s not recommended to drive with this code active, as improper oil pressure regulation can lead to engine damage over time.
How do I diagnose the P06DC code in my 2017 Chevrolet Silverado?
Diagnosis typically involves inspecting the oil pressure control solenoid valve, checking the wiring and connectors for damage, and verifying the circuit voltage with a multimeter.
What should I check if I get the P06DC code?
Start by inspecting the oil pressure control solenoid for signs of failure, checking the wiring and connectors for shorts or damage, and ensuring there is no contamination in the oil system.
How is the P06DC code usually fixed?
Repairs may include replacing the oil pressure control solenoid, repairing or replacing damaged wiring or connectors, or reprogramming/updating the PCM if necessary.
Can low oil levels cause the P06DC code?
While low oil levels may not directly trigger this code, they can contribute to oil pressure issues, so it’s important to verify oil levels and quality as part of the diagnosis.
What tools are needed to fix the P06DC code?
You may need an OBDII scanner, a multimeter for electrical testing, and basic tools for accessing and replacing the oil pressure control solenoid.
Does the P06DC code require reprogramming the PCM?
In some cases, reprogramming or updating the PCM may be needed if the issue is software-related, but this should only be done after verifying the solenoid and circuit are functioning properly.
Discuss the causes and fixes for P06DC 2017 Chevrolet Silverado OBDII Code
Code P06DC 2017 Chevrolet Silverado comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
