P06DB 2014 Chevrolet Silverado Code - Engine Oil Pressure Control Solenoid Valve Control Circuit Low Voltage
Quick Answer
The Engine Oil Pressure Control Solenoid Valve is used to control engine oil pressure inside the mechanical engine oil pump. Common causes include Faulty Engine Oil Pressure Control Solenoid Valve, Engine Oil Pressure Control Solenoid Valve harness is open or shorted, Engine Oil Pressure Control Solenoid Valve circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P06DB 2014 Chevrolet Silverado indicates Engine Oil Pressure Control Solenoid Valve Control Circuit Low Voltage.
- Common causes
- Common causes include Faulty Engine Oil Pressure Control Solenoid Valve, Engine Oil Pressure Control Solenoid Valve harness is open or shorted, Engine Oil Pressure Control Solenoid Valve circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P06DB 2014 Chevrolet Silverado Description
The Diagnostic Trouble Code (DTC) will be set when the control circuit's commanded state does not match the actual state for greater than 1 s.
What are the Possible Causes of the DTC P06DB 2014 Chevrolet Silverado?
- Faulty Engine Oil Pressure Control Solenoid Valve
- Engine Oil Pressure Control Solenoid Valve harness is open or shorted
- Engine Oil Pressure Control Solenoid Valve circuit poor electrical connection
- Faulty Engine Control Module (ECM)
How to Fix the DTC P06DB 2014 Chevrolet Silverado?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P06DB 2014 Chevrolet Silverado code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P06DB 2014 Chevrolet Silverado code?
Need more information on how to fix the P06DB 2014 Chevrolet Silverado code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P06DB 2014 Chevrolet Silverado code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P06DB 2014 Chevrolet Silverado Code
1. What does the OBDII code P06DB mean on a 2014 Chevrolet Silverado?
The code P06DB indicates a problem with the Engine Oil Pressure Control Solenoid Valve Control Circuit, specifically a low voltage issue.
2. What are the common symptoms of the P06DB code in a 2014 Chevrolet Silverado?
Symptoms may include an illuminated check engine light, poor engine performance, erratic oil pressure readings, and potential engine protection mode activation.
3. What causes the P06DB code to appear on a 2014 Chevrolet Silverado?
Common causes include a faulty oil pressure control solenoid, damaged wiring or connectors in the solenoid circuit, a low engine oil level, or a malfunctioning engine control module (ECM).
4. Can I drive my 2014 Chevrolet Silverado with the P06DB code active?
It is not recommended to drive with this code active, as incorrect oil pressure regulation can lead to severe engine damage.
5. How do I diagnose the P06DB code on my 2014 Chevrolet Silverado?
Diagnose this code by inspecting the oil pressure control solenoid, checking its wiring and connectors for damage or corrosion, and verifying the engine oil level and condition.
6. How can I fix the P06DB code on a 2014 Chevrolet Silverado?
Fixes may include replacing the faulty oil pressure control solenoid, repairing damaged wiring or connectors, ensuring proper oil levels, or reprogramming or replacing the ECM if necessary.
7. What tools are needed to troubleshoot the P06DB code in a 2014 Chevrolet Silverado?
You’ll need an OBDII scanner, a multimeter for circuit testing, and basic hand tools to remove and inspect components.
8. Is a low engine oil level a possible cause of the P06DB code?
Yes, a low or degraded engine oil level can cause improper oil pressure regulation, triggering the P06DB code.
9. How much does it cost to repair the P06DB code on a 2014 Chevrolet Silverado?
Repair costs can vary but typically range from $150 to $400, depending on whether the solenoid, wiring, or ECM needs replacement.
10. Can a dirty or clogged oil filter trigger the P06DB code?
Yes, a dirty or clogged oil filter can restrict oil flow, potentially resulting in improper pressure control and triggering the code.
Discuss the causes and fixes for P06DB 2014 Chevrolet Silverado OBDII Code
Code P06DB 2014 Chevrolet Silverado comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
