AutoCodes – GMC – P06DA 2017 GMC Sierra

P06DA 2017 GMC Sierra Code - Engine Oil Pressure Control Solenoid Valve Control Circuit

Quick Answer

The Engine Oil Pressure Control Solenoid Valve is used to control engine oil pressure inside the mechanical engine oil pump. Common causes include Faulty Engine Oil Pressure Control Solenoid Valve, Engine Oil Pressure Control Solenoid Valve harness is open or shorted, Engine Oil Pressure Control Solenoid Valve circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P06DA 2017 GMC Sierra indicates Engine Oil Pressure Control Solenoid Valve Control Circuit.
Common causes: Common causes include Faulty Engine Oil Pressure Control Solenoid Valve, Engine Oil Pressure Control Solenoid Valve harness is open or shorted, Engine Oil Pressure Control Solenoid Valve circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 391

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Jul 14, 2022

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P06DA 2017 GMC Sierra Description

The Engine Oil Pressure Control Solenoid Valve is used to control engine oil pressure inside the mechanical engine oil pump. The control module controls the commanded state of the solenoid valve based on the following inputs: Engine Speed, Calculated Engine Oil Temperature, Engine Oil Pressure, and Engine Run Time. When the solenoid valve is commanded Off, oil pressure is higher. When the solenoid valve is commanded On, oil pressure is lower.
The Diagnostic Trouble Code (DTC) will be set when the control circuit's commanded state does not match the actual state for greater than 1 s.

OBDII Code P06DA 2017 GMC Sierra - Engine Oil Pressure Control Solenoid Valve Control Circuit - AutoCodes.com — P06DA 2017 GMC Sierra Code - Engine Oil Pressure Control Solenoid Valve Control Circuit

What does this mean?

What are the Possible Causes of the DTC P06DA 2017 GMC Sierra?

Faulty Engine Oil Pressure Control Solenoid Valve
Engine Oil Pressure Control Solenoid Valve harness is open or shorted
Engine Oil Pressure Control Solenoid Valve circuit poor electrical connection
Faulty Engine Control Module (ECM)

How to Fix the DTC P06DA 2017 GMC Sierra?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P06DA 2017 GMC Sierra code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P06DA 2017 GMC Sierra code?

Need more information on how to fix the P06DA 2017 GMC Sierra code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P06DA 2017 GMC Sierra code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P06DA 2017 GMC Sierra Code

What does the OBDII code P06DA mean on a 2017 GMC Sierra?

The P06DA code indicates an issue with the Engine Oil Pressure Control Solenoid Valve Control Circuit, which manages oil pressure levels in the engine.

What are the common symptoms of a P06DA code in a 2017 GMC Sierra?

Symptoms may include an illuminated check engine light, low oil pressure warning, engine noise, reduced fuel efficiency, or difficulty starting the engine.

What causes the P06DA code in a 2017 GMC Sierra?

Common causes include a faulty oil pressure control solenoid, damaged wiring or connectors in the circuit, low or dirty engine oil, or a malfunctioning PCM (Powertrain Control Module).

Can I drive my 2017 GMC Sierra with the P06DA code?

Driving with this code is not recommended, as it could lead to engine damage due to improper oil pressure regulation.

How do I diagnose the P06DA code on a 2017 GMC Sierra?

Start by inspecting the oil pressure control solenoid, checking for damaged wiring or connectors, verifying oil level and condition, and using a scan tool to monitor related data.

How can I fix the P06DA code on a 2017 GMC Sierra?

Potential fixes include replacing the oil pressure control solenoid, repairing or replacing damaged wiring or connectors, performing an oil change, or reprogramming the PCM if necessary.

How much does it cost to repair the P06DA code on a 2017 GMC Sierra?

Repair costs can vary but typically range from $150 to $300, depending on whether the solenoid, wiring, or other components need replacement.

What happens if I ignore the P06DA code on my 2017 GMC Sierra?

Ignoring the code can lead to severe engine damage, as improper oil pressure regulation may cause excessive wear or overheating of engine components.

Can low engine oil cause the P06DA code on a 2017 GMC Sierra?

Yes, low or dirty engine oil can trigger the code by causing the oil pressure control system to malfunction.

Does the P06DA code require reprogramming the PCM on a 2017 GMC Sierra?

In some cases, a PCM update or reprogramming may be needed if the issue is software-related, but this is less common compared to solenoid or wiring issues.