P06DA 2014 GMC Sierra Code - Engine Oil Pressure Control Solenoid Valve Control Circuit
Quick Answer
The Engine Oil Pressure Control Solenoid Valve is used to control engine oil pressure inside the mechanical engine oil pump. Common causes include Faulty Engine Oil Pressure Control Solenoid Valve, Engine Oil Pressure Control Solenoid Valve harness is open or shorted, Engine Oil Pressure Control Solenoid Valve circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P06DA 2014 GMC Sierra indicates Engine Oil Pressure Control Solenoid Valve Control Circuit.
- Common causes
- Common causes include Faulty Engine Oil Pressure Control Solenoid Valve, Engine Oil Pressure Control Solenoid Valve harness is open or shorted, Engine Oil Pressure Control Solenoid Valve circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P06DA 2014 GMC Sierra Description
The Diagnostic Trouble Code (DTC) will be set when the control circuit's commanded state does not match the actual state for greater than 1 s.
What are the Possible Causes of the DTC P06DA 2014 GMC Sierra?
- Faulty Engine Oil Pressure Control Solenoid Valve
- Engine Oil Pressure Control Solenoid Valve harness is open or shorted
- Engine Oil Pressure Control Solenoid Valve circuit poor electrical connection
- Faulty Engine Control Module (ECM)
How to Fix the DTC P06DA 2014 GMC Sierra?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P06DA 2014 GMC Sierra code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P06DA 2014 GMC Sierra code?
Need more information on how to fix the P06DA 2014 GMC Sierra code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P06DA 2014 GMC Sierra code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P06DA 2014 GMC Sierra Code
1. What does the OBDII code P06DA mean on a 2014 GMC Sierra?
The P06DA code indicates an issue with the Engine Oil Pressure Control Solenoid Valve Control Circuit, which is responsible for regulating oil pressure in the engine.
2. What are common symptoms of the P06DA code on a 2014 GMC Sierra?
Symptoms may include an illuminated check engine light, low or fluctuating oil pressure readings, poor engine performance, or unusual engine noises.
3. What causes the P06DA code on a 2014 GMC Sierra?
Common causes include a faulty oil pressure control solenoid, damaged wiring or connectors in the circuit, low oil levels, or contaminated engine oil.
4. Can I drive my 2014 GMC Sierra with the P06DA code active?
Driving with this code active is not recommended, as it can lead to improper oil pressure, which may damage the engine over time.
5. How do I diagnose the P06DA code on a 2014 GMC Sierra?
Diagnosis typically involves inspecting the oil pressure control solenoid, checking for damaged wiring or connectors, verifying oil levels and quality, and using a diagnostic scanner to monitor live data.
6. How do I fix the P06DA code on a 2014 GMC Sierra?
Repairs may include replacing the oil pressure control solenoid, repairing damaged wiring or connectors, performing an oil change, or addressing oil pump issues.
7. How much does it cost to repair the P06DA code on a 2014 GMC Sierra?
Repair costs can vary but typically range from $150 to $400, depending on whether the solenoid needs replacement or if there are wiring issues to address.
8. Can low oil levels trigger the P06DA code on a 2014 GMC Sierra?
Yes, low oil levels or degraded oil can cause this code by affecting the proper operation of the oil pressure control solenoid.
9. What tools are needed to diagnose the P06DA code on a 2014 GMC Sierra?
You’ll need an OBDII scanner, a multimeter for checking electrical connections, and basic automotive tools to inspect and replace components.
10. Is the P06DA code common on a 2014 GMC Sierra?
While not extremely common, the code can occur due to wear and tear on the oil pressure control solenoid or issues with oil maintenance.
Discuss the causes and fixes for P06DA 2014 GMC Sierra OBDII Code
Code P06DA 2014 GMC Sierra comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
