P06DA 2014 Chevrolet Silverado Code - Engine Oil Pressure Control Solenoid Valve Control Circuit
Quick Answer
The Engine Oil Pressure Control Solenoid Valve is used to control engine oil pressure inside the mechanical engine oil pump. Common causes include Faulty Engine Oil Pressure Control Solenoid Valve, Engine Oil Pressure Control Solenoid Valve harness is open or shorted, Engine Oil Pressure Control Solenoid Valve circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P06DA 2014 Chevrolet Silverado indicates Engine Oil Pressure Control Solenoid Valve Control Circuit.
- Common causes
- Common causes include Faulty Engine Oil Pressure Control Solenoid Valve, Engine Oil Pressure Control Solenoid Valve harness is open or shorted, Engine Oil Pressure Control Solenoid Valve circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P06DA 2014 Chevrolet Silverado Description
The Diagnostic Trouble Code (DTC) will be set when the control circuit's commanded state does not match the actual state for greater than 1 s.
What are the Possible Causes of the DTC P06DA 2014 Chevrolet Silverado?
- Faulty Engine Oil Pressure Control Solenoid Valve
- Engine Oil Pressure Control Solenoid Valve harness is open or shorted
- Engine Oil Pressure Control Solenoid Valve circuit poor electrical connection
- Faulty Engine Control Module (ECM)
How to Fix the DTC P06DA 2014 Chevrolet Silverado?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P06DA 2014 Chevrolet Silverado code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P06DA 2014 Chevrolet Silverado code?
Need more information on how to fix the P06DA 2014 Chevrolet Silverado code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P06DA 2014 Chevrolet Silverado code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P06DA 2014 Chevrolet Silverado Code
1. What does the OBDII code P06DA mean on a 2014 Chevrolet Silverado?
The P06DA code indicates a problem with the Engine Oil Pressure Control Solenoid Valve Control Circuit, which is responsible for regulating oil pressure.
2. What are the common symptoms of code P06DA?
Symptoms include low or high oil pressure readings, engine warning lights, reduced engine performance, and potential oil leaks.
3. What causes the P06DA code to appear on a 2014 Chevrolet Silverado?
Common causes include a faulty oil pressure control solenoid, damaged wiring or connectors in the circuit, or an issue with the engine control module (ECM).
4. Can I drive my 2014 Chevrolet Silverado with the P06DA code?
Driving with this code may lead to engine damage due to improper oil pressure regulation. It’s best to address the issue promptly.
5. How is the P06DA code diagnosed?
Diagnosis involves scanning for codes, visually inspecting wiring and connectors, testing the solenoid, and verifying signals from the ECM.
6. How do you fix the P06DA code on a 2014 Chevrolet Silverado?
Repairs may include replacing the oil pressure control solenoid, repairing damaged wiring, or reprogramming the ECM.
7. How much does it cost to fix the P06DA code?
Repair costs can vary depending on the issue, ranging from $100–$300 for parts and labor, with higher costs if ECM replacement is needed.
8. What tools are needed to troubleshoot the P06DA code?
You’ll need an OBDII scanner, multimeter, and possibly a wiring diagram for the oil pressure control solenoid circuit.
9. Can low engine oil cause the P06DA code?
Yes, insufficient oil levels or dirty oil can affect the operation of the oil pressure control solenoid and trigger this code.
10. Is the P06DA code specific to the 2014 Chevrolet Silverado?
No, this code can appear on other vehicles with similar oil pressure control systems, but the diagnosis and repair process may vary.
Discuss the causes and fixes for P06DA 2014 Chevrolet Silverado OBDII Code
Code P06DA 2014 Chevrolet Silverado comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
