P06D2 GMC Code - 5V Reference 5 Circuit
Quick Answer
The Engine Control Module (ECM) has four (5) internal 5 Volt reference circuits (Some models have two (2) internal 5 Volt reference circuits). Common causes include Faulty Sensor on 5 Volt circuit, Sensor on 5 Volt circuit harness is open or shorted, Sensor on 5 Volt circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P06D2 GMC indicates 5V Reference 5 Circuit.
- Common causes
- Common causes include Faulty Sensor on 5 Volt circuit, Sensor on 5 Volt circuit harness is open or shorted, Sensor on 5 Volt circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P06D2 GMC Description
What are the Possible Causes of the DTC P06D2 GMC?
- Faulty Sensor on 5 Volt circuit
- Sensor on 5 Volt circuit harness is open or shorted
- Sensor on 5 Volt circuit poor electrical connection
- Faulty Engine Control Module (ECM)
How to Fix the DTC P06D2 GMC?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P06D2 GMC code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P06D2 GMC code?
Need more information on how to fix the P06D2 GMC code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P06D2 GMC code diagnosed by a professional: Find a repair shop in your area
Information for Specific GMC Models
- P06D2 2014 GMC Sierra — 5V Reference 5 Circuit
- P06D2 2015 GMC Sierra — 5V Reference 5 Circuit
- P06D2 2016 GMC Sierra — 5V Reference 5 Circuit
- P06D2 2017 GMC Sierra — 5V Reference 5 Circuit
- P06D2 2018 GMC Sierra — 5V Reference 5 Circuit
Frequently Asked Questions about P06D2 GMC Code
What does the OBDII code P06D2 mean for GMC vehicles?
1. The code P06D2 indicates a problem with the 5V Reference 5 Circuit, which provides a stable 5-volt supply to specific sensors in the vehicle's system. 2.
What are the common symptoms of the P06D2 code on a GMC?
Symptoms may include the check engine light turning on, poor engine performance, erratic sensor readings, or difficulty starting the vehicle. 3.
What causes the P06D2 code to trigger?
Common causes include a shorted or open circuit, a faulty Engine Control Module (ECM), damaged wiring, or a defective sensor connected to the 5V reference circuit. 4.
How is the P06D2 code diagnosed?
A technician will check the wiring and connectors for damage, verify the 5V reference voltage with a multimeter, and inspect related sensors for faults or failures. 5.
Can I drive my GMC with a P06D2 code?
Driving with this code is not recommended, as it can lead to poor engine performance or further damage to the vehicle's electrical system. 6.
How do you fix the P06D2 code on a GMC vehicle?
Repairs may involve fixing or replacing damaged wiring, replacing a faulty sensor, or reprogramming or replacing the ECM if necessary. 7.
Which sensors rely on the 5V Reference 5 Circuit in GMC vehicles?
This circuit typically powers critical sensors like throttle position sensors, manifold absolute pressure sensors, or other engine-related sensors. 8.
Can a bad ground connection cause the P06D2 code?
Yes, a poor ground connection can disrupt the 5V reference circuit and trigger this code. 9.
Will clearing the P06D2 code fix the issue permanently?
Clearing the code without addressing the root cause will only temporarily remove the code, and the problem will likely return. 10.
How much does it cost to repair a P06D2 code on a GMC?
Repair costs vary depending on the cause, ranging from $50 for simple wiring repairs to $500 or more if the ECM needs replacement.
Discuss the causes and fixes for P06D2 GMC OBDII Code
Code P06D2 GMC comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
