P06CE Ford Code - Cylinder 10 Glow Plug Incorrect
Quick Answer
The glow plug system is used to assist in providing the heat required to begin combustion during cold engine temperatures. Common causes include Faulty cylinder #10 glow plug, Cylinder #10 glow plug harness is open or shorted, Cylinder #10 glow plug circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P06CE Ford indicates Cylinder 10 Glow Plug Incorrect.
- Common causes
- Common causes include Faulty cylinder #10 glow plug, Cylinder #10 glow plug harness is open or shorted, Cylinder #10 glow plug circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P06CE Ford Description
What are the Possible Causes of the DTC P06CE Ford?
- Faulty cylinder #10 glow plug
- Cylinder #10 glow plug harness is open or shorted
- Cylinder #10 glow plug circuit poor electrical connection
- Faulty glow plug module
How to Fix the DTC P06CE Ford?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P06CE Ford code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P06CE Ford code?
Need more information on how to fix the P06CE Ford code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P06CE Ford code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P06CE Ford Code
1. What are the common symptoms of OBDII code P06CE in a Ford related to Cylinder 10 Glow Plug Incorrect?
- Common symptoms include rough idling, decreased engine performance, and potential issues with starting the vehicle.
2. What could cause the Cylinder 10 Glow Plug Incorrect error code (P06CE) in a Ford vehicle?
- The error code could be triggered by a faulty glow plug, damaged wiring, a malfunctioning glow plug control module, or issues with the engine's computer.
3. How can I diagnose the source of the Cylinder 10 Glow Plug Incorrect error code in my Ford?
- To diagnose the issue, you may need to perform a visual inspection of the glow plug and its wiring, test the glow plug's resistance, check the glow plug control module, and use a diagnostic scanner to read the error code.
4. Can I continue driving my Ford with the P06CE error code related to Cylinder 10 Glow Plug Incorrect?
- It is not recommended to drive your vehicle with this error code as it can lead to further engine damage and decreased performance. It is best to address the issue promptly.
5. What are some repair tips for fixing the Cylinder 10 Glow Plug Incorrect error code in a Ford?
- Repair tips may include replacing the faulty glow plug, repairing or replacing damaged wiring, testing and potentially replacing the glow plug control module, and clearing the error code with a diagnostic scanner.
6. Is it necessary to replace all glow plugs if one is found to be faulty in a Ford triggering the P06CE code?
- While it is not always necessary to replace all glow plugs, it is a good practice to inspect and potentially replace all glow plugs if one is found to be faulty to ensure consistent performance.
7. Can a DIY enthusiast fix the Cylinder 10 Glow Plug Incorrect error code in a Ford, or should it be left to a professional mechanic?
- Depending on your level of automotive expertise, you may be able to address the issue yourself by following repair guides and using the necessary tools. However, if you are unsure, it is advisable to seek help from a professional mechanic.
8. How much can I expect to pay for repairing the Cylinder 10 Glow Plug Incorrect error code in a Ford at a repair shop?
- The cost of repairing this issue can vary depending on the extent of the problem, the labor rates of the repair shop, and the cost of any replacement parts. It is recommended to obtain quotes from different shops for a more accurate estimate.
9. Will resetting the error code using a diagnostic scanner solve the issue related to the Cylinder 10 Glow Plug Incorrect error code in a Ford?
- While resetting the error code may temporarily clear the warning light, it will not fix the underlying issue causing the error code. It is important to diagnose and address the root cause of the problem.
10. How can I prevent the Cylinder 10 Glow Plug Incorrect error code from recurring in my Ford in the future?
- To prevent the error code from reoccurring, it is essential to perform regular maintenance on your vehicle, including checking the glow plugs, inspecting the wiring, and addressing any issues promptly to avoid further damage.
Discuss the causes and fixes for P06CE Ford OBDII Code
Code P06CE Ford comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
