P06CC 2016 Chevrolet Silverado Code - Cylinder 8 Glow Plug Incorrect
Quick Answer
n the diesel engine, air alone is compressed in the cylinder. Common causes include Faulty cylinder #1 glow plug, Cylinder #1 glow plug harness is open or shorted, Cylinder #1 glow plug circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P06CC 2016 Chevrolet Silverado indicates Cylinder 8 Glow Plug Incorrect.
- Common causes
- Common causes include Faulty cylinder #1 glow plug, Cylinder #1 glow plug harness is open or shorted, Cylinder #1 glow plug circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P06CC 2016 Chevrolet Silverado Description
Control of the glow plugs is accomplished by the glow plug control module. The nominal voltage for the glow plugs is 5.4 volts. When the ignition is turned On, the glow plug control module applies 7.2 V for 2.2 s, then 5.7 V for 0.8 s, and then 5.4 V until 1200°C (2192°F) is reached. The maximum voltage of the system is 10 V. While the engine is running the voltage will vary between 4.7 - 10 V when in closed loop control to maintain a glow plug temperature that ranges from 1150° - 1180°C (2102° - 2156°F). The temperature and the power consumption are controlled between the Engine Control Module (ECM) and the glow plug control module within a wide range to suit the engine's pre-heating requirements. Each glow plug is energized individually. This capability yields more optimum heat times for the glow plugs, thus pre - glow times can be kept to a minimum for a short wait to crank times and maximum glow plug durability. A Diagnostic Trouble Code (DTC) will be set if the Glow Plug resistance is not within a calibrated range.
What are the Possible Causes of the DTC P06CC 2016 Chevrolet Silverado?
- Faulty cylinder #1 glow plug
- Cylinder #1 glow plug harness is open or shorted
- Cylinder #1 glow plug circuit poor electrical connection
- Faulty Glow Plug Control Module
How to Fix the DTC P06CC 2016 Chevrolet Silverado?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P06CC 2016 Chevrolet Silverado code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P06CC 2016 Chevrolet Silverado code?
Need more information on how to fix the P06CC 2016 Chevrolet Silverado code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P06CC 2016 Chevrolet Silverado code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P06CC 2016 Chevrolet Silverado Code
What does the OBDII code P06CC mean for a 2016 Chevrolet Silverado?
The P06CC code indicates a problem with the Cylinder 8 glow plug, which is not functioning correctly or is providing incorrect feedback to the engine control module (ECM).
What are the common symptoms of code P06CC in a 2016 Chevrolet Silverado?
Symptoms may include difficulty starting the engine, rough idle, reduced fuel efficiency, and the check engine light turning on.
What causes the P06CC code to appear in a 2016 Chevrolet Silverado?
The most common causes are a faulty glow plug in cylinder 8, damaged wiring or connectors, or an issue with the glow plug control module.
Can I drive my 2016 Chevrolet Silverado with the P06CC code active?
Driving with this code is possible but not recommended, as it may lead to poor engine performance, reduced efficiency, or potential damage to other engine components.
How do you diagnose the P06CC code on a 2016 Chevrolet Silverado?
Diagnosis involves scanning for codes with an OBDII tool, inspecting the cylinder 8 glow plug, checking wiring and connectors for damage, and testing the glow plug control module for faults.
How do you fix the P06CC code on a 2016 Chevrolet Silverado?
Repairs may include replacing the cylinder 8 glow plug, repairing or replacing damaged wiring, and ensuring the glow plug control module is working correctly.
How much does it cost to repair a P06CC code on a 2016 Chevrolet Silverado?
The repair cost varies but typically ranges from $100 to $300, depending on whether you need to replace the glow plug or repair wiring.
Can a faulty glow plug cause other problems in a 2016 Chevrolet Silverado?
Yes, a faulty glow plug can lead to harder starts, misfires, reduced engine efficiency, and strain on the glow plug control module.
Do I need special tools to fix the P06CC code in a 2016 Chevrolet Silverado?
You may need a multimeter to test electrical components and a glow plug socket to safely remove and replace the glow plug.
Is it necessary to replace all glow plugs if one fails in a 2016 Chevrolet Silverado?
It’s not mandatory, but replacing all glow plugs may be a good preventative measure if they are older or nearing their expected lifespan.
Discuss the causes and fixes for P06CC 2016 Chevrolet Silverado OBDII Code
Code P06CC 2016 Chevrolet Silverado comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
