P06CB Chevrolet Code - Cylinder 7 Glow Plug Incorrect
Quick Answer
n the diesel engine, air alone is compressed in the cylinder. Common causes include Faulty cylinder #1 glow plug, Cylinder #1 glow plug harness is open or shorted, Cylinder #1 glow plug circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P06CB Chevrolet indicates Cylinder 7 Glow Plug Incorrect.
- Common causes
- Common causes include Faulty cylinder #1 glow plug, Cylinder #1 glow plug harness is open or shorted, Cylinder #1 glow plug circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P06CB Chevrolet Description
Control of the glow plugs is accomplished by the glow plug control module. The nominal voltage for the glow plugs is 5.4 volts. When the ignition is turned On, the glow plug control module applies 7.2 V for 2.2 s, then 5.7 V for 0.8 s, and then 5.4 V until 1200°C (2192°F) is reached. The maximum voltage of the system is 10 V. While the engine is running the voltage will vary between 4.7 - 10 V when in closed loop control to maintain a glow plug temperature that ranges from 1150° - 1180°C (2102° - 2156°F). The temperature and the power consumption are controlled between the Engine Control Module (ECM) and the glow plug control module within a wide range to suit the engine's pre-heating requirements. Each glow plug is energized individually. This capability yields more optimum heat times for the glow plugs, thus pre - glow times can be kept to a minimum for a short wait to crank times and maximum glow plug durability. A Diagnostic Trouble Code (DTC) will be set if the Glow Plug resistance is not within a calibrated range.
What are the Possible Causes of the DTC P06CB Chevrolet?
- Faulty cylinder #1 glow plug
- Cylinder #1 glow plug harness is open or shorted
- Cylinder #1 glow plug circuit poor electrical connection
- Faulty Glow Plug Control Module
How to Fix the DTC P06CB Chevrolet?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P06CB Chevrolet code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P06CB Chevrolet code?
Need more information on how to fix the P06CB Chevrolet code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P06CB Chevrolet code diagnosed by a professional: Find a repair shop in your area
Information for Specific Chevrolet Models
- P06CB 2014 Chevrolet Silverado — Cylinder 7 Glow Plug Incorrect
- P06CB 2015 Chevrolet Silverado — Cylinder 7 Glow Plug Incorrect
- P06CB 2016 Chevrolet Silverado — Cylinder 7 Glow Plug Incorrect
- P06CB 2017 Chevrolet Silverado — Cylinder 7 Glow Plug Incorrect
- P06CB 2018 Chevrolet Silverado — Cylinder 7 Glow Plug Incorrect
Frequently Asked Questions about P06CB Chevrolet Code
No Frequently Asked Questions about P06CB Chevrolet Code found.
Discuss the causes and fixes for P06CB Chevrolet OBDII Code
Code P06CB Chevrolet comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
