P06CB 2017 GMC Sierra Code - Cylinder 7 Glow Plug Incorrect
Quick Answer
n the diesel engine, air alone is compressed in the cylinder. Common causes include Faulty cylinder #1 glow plug, Cylinder #1 glow plug harness is open or shorted, Cylinder #1 glow plug circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P06CB 2017 GMC Sierra indicates Cylinder 7 Glow Plug Incorrect.
- Common causes
- Common causes include Faulty cylinder #1 glow plug, Cylinder #1 glow plug harness is open or shorted, Cylinder #1 glow plug circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P06CB 2017 GMC Sierra Description
Control of the glow plugs is accomplished by the glow plug control module. The nominal voltage for the glow plugs is 5.4 volts. When the ignition is turned On, the glow plug control module applies 7.2 V for 2.2 s, then 5.7 V for 0.8 s, and then 5.4 V until 1200°C (2192°F) is reached. The maximum voltage of the system is 10 V. While the engine is running the voltage will vary between 4.7 - 10 V when in closed loop control to maintain a glow plug temperature that ranges from 1150° - 1180°C (2102° - 2156°F). The temperature and the power consumption are controlled between the Engine Control Module (ECM) and the glow plug control module within a wide range to suit the engine's pre-heating requirements. Each glow plug is energized individually. This capability yields more optimum heat times for the glow plugs, thus pre - glow times can be kept to a minimum for a short wait to crank times and maximum glow plug durability. A Diagnostic Trouble Code (DTC) will be set if the Glow Plug resistance is not within a calibrated range.
What are the Possible Causes of the DTC P06CB 2017 GMC Sierra?
- Faulty cylinder #1 glow plug
- Cylinder #1 glow plug harness is open or shorted
- Cylinder #1 glow plug circuit poor electrical connection
- Faulty Glow Plug Control Module
How to Fix the DTC P06CB 2017 GMC Sierra?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P06CB 2017 GMC Sierra code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P06CB 2017 GMC Sierra code?
Need more information on how to fix the P06CB 2017 GMC Sierra code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P06CB 2017 GMC Sierra code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P06CB 2017 GMC Sierra Code
What does the OBDII code P06CB mean on a 2017 GMC Sierra?
P06CB indicates that the Engine Control Module (ECM) has detected an issue with the glow plug circuit for cylinder 7, specifically that it is not functioning correctly.
What are the symptoms of the P06CB code on a 2017 GMC Sierra?
Common symptoms include difficulty starting the engine in cold weather, rough idling, reduced fuel efficiency, and an illuminated check engine light.
What causes the P06CB code on a 2017 GMC Sierra?
The most common causes are a faulty cylinder 7 glow plug, damaged wiring or connectors in the glow plug circuit, or a malfunctioning glow plug control module.
Can you drive with the P06CB code on a 2017 GMC Sierra?
While the vehicle might still be drivable, prolonged driving with this code can lead to poor cold-start performance and potential damage to the diesel engine’s components.
How do you diagnose the P06CB code on a 2017 GMC Sierra?
Diagnosis involves scanning the ECM for codes, inspecting the cylinder 7 glow plug and its wiring, testing the resistance of the glow plug, and checking the functionality of the glow plug control module.
How do you fix the P06CB code on a 2017 GMC Sierra?
Repairs may include replacing the cylinder 7 glow plug, repairing or replacing damaged wiring or connectors, or replacing the glow plug control module if it is defective.
How much does it cost to repair the P06CB code on a 2017 GMC Sierra?
The cost can vary but typically ranges from $100 to $300, depending on whether the issue is a faulty glow plug or more extensive wiring and module repairs.
Can a bad battery cause the P06CB code on a 2017 GMC Sierra?
While uncommon, a weak or failing battery can sometimes affect the glow plug system's performance, particularly in colder weather, and should be checked if other components are functioning properly.
What tools are needed to troubleshoot the P06CB code on a 2017 GMC Sierra?
You’ll need an OBDII scanner, a multimeter to test resistance, and basic hand tools to inspect and replace the glow plug or wiring.
Does the P06CB code impact emissions on a 2017 GMC Sierra?
Yes, a malfunctioning glow plug can affect the combustion process, potentially leading to increased emissions, especially during cold starts.
Discuss the causes and fixes for P06CB 2017 GMC Sierra OBDII Code
Code P06CB 2017 GMC Sierra comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
