P06CA 2014 Chevrolet Silverado Code - Cylinder 6 Glow Plug Incorrect
Quick Answer
n the diesel engine, air alone is compressed in the cylinder. Common causes include Faulty cylinder #1 glow plug, Cylinder #1 glow plug harness is open or shorted, Cylinder #1 glow plug circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P06CA 2014 Chevrolet Silverado indicates Cylinder 6 Glow Plug Incorrect.
- Common causes
- Common causes include Faulty cylinder #1 glow plug, Cylinder #1 glow plug harness is open or shorted, Cylinder #1 glow plug circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P06CA 2014 Chevrolet Silverado Description
Control of the glow plugs is accomplished by the glow plug control module. The nominal voltage for the glow plugs is 5.4 volts. When the ignition is turned On, the glow plug control module applies 7.2 V for 2.2 s, then 5.7 V for 0.8 s, and then 5.4 V until 1200°C (2192°F) is reached. The maximum voltage of the system is 10 V. While the engine is running the voltage will vary between 4.7 - 10 V when in closed loop control to maintain a glow plug temperature that ranges from 1150° - 1180°C (2102° - 2156°F). The temperature and the power consumption are controlled between the Engine Control Module (ECM) and the glow plug control module within a wide range to suit the engine's pre-heating requirements. Each glow plug is energized individually. This capability yields more optimum heat times for the glow plugs, thus pre - glow times can be kept to a minimum for a short wait to crank times and maximum glow plug durability. A Diagnostic Trouble Code (DTC) will be set if the Glow Plug resistance is not within a calibrated range.
What are the Possible Causes of the DTC P06CA 2014 Chevrolet Silverado?
- Faulty cylinder #1 glow plug
- Cylinder #1 glow plug harness is open or shorted
- Cylinder #1 glow plug circuit poor electrical connection
- Faulty Glow Plug Control Module
How to Fix the DTC P06CA 2014 Chevrolet Silverado?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P06CA 2014 Chevrolet Silverado code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P06CA 2014 Chevrolet Silverado code?
Need more information on how to fix the P06CA 2014 Chevrolet Silverado code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P06CA 2014 Chevrolet Silverado code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P06CA 2014 Chevrolet Silverado Code
1. What are the common symptoms of OBDII code P06CA in a 2014 Chevrolet Silverado?
The common symptoms include rough idling, decreased engine performance, and the illumination of the Check Engine Light.
2. What does the OBDII code P06CA indicate in a 2014 Chevrolet Silverado?
The code P06CA indicates that there is an issue with the glow plug in cylinder 6 of the engine.
3. What are the possible causes of OBDII code P06CA in a 2014 Chevrolet Silverado?
Possible causes include a faulty glow plug in cylinder 6, wiring issues, a bad glow plug control module, or a malfunctioning PCM.
4. How can I diagnose the OBDII code P06CA in my 2014 Chevrolet Silverado?
Diagnosis involves using an OBDII scanner to retrieve the code, inspecting the glow plug in cylinder 6, checking the wiring for any damage, and testing the glow plug control module.
5. Can I continue driving my 2014 Chevrolet Silverado with OBDII code P06CA?
It is not recommended to continue driving with the code active, as it can lead to poor engine performance and potential damage if left unresolved.
6. How can I repair OBDII code P06CA in my 2014 Chevrolet Silverado?
Repairing the code may involve replacing the glow plug in cylinder 6, repairing any damaged wiring, replacing the glow plug control module, or reprogramming the PCM.
7. Are there any DIY tips for fixing OBDII code P06CA in a 2014 Chevrolet Silverado?
While some basic diagnosis can be done at home, it is recommended to have a professional mechanic handle the repair to ensure proper resolution of the issue.
8. How much does it typically cost to repair OBDII code P06CA in a 2014 Chevrolet Silverado?
The cost of repair can vary depending on the exact cause of the issue, but it may range from a few hundred to a thousand dollars including parts and labor.
9. How urgent is it to address OBDII code P06CA in a 2014 Chevrolet Silverado?
It is recommended to address the issue promptly to avoid further engine damage and to restore optimal performance and fuel efficiency.
10. Can OBDII code P06CA in a 2014 Chevrolet Silverado cause any long-term damage if ignored?
Ignoring the code can potentially lead to more severe engine problems, such as reduced fuel efficiency, engine misfires, and even damage to the catalytic converter over time.
Discuss the causes and fixes for P06CA 2014 Chevrolet Silverado OBDII Code
Code P06CA 2014 Chevrolet Silverado comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
