P06B7 GMC Code - Control Module Knock Sensor Processor 2 Performance
Quick Answer
The Knock Sensor system enables the Engine Control Module (ECM) to control the ignition timing for the best possible performance while protecting the engine from potentially damaging levels of detonation, also known as spark knock. Common causes include Faulty Knock Sensor Bank 2, Knock Sensor Bank 2 circuit poor electrical connection, Knock Sensor Bank 2 harness is open or shorted. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P06B7 GMC indicates Control Module Knock Sensor Processor 2 Performance.
- Common causes
- Common causes include Faulty Knock Sensor Bank 2, Knock Sensor Bank 2 circuit poor electrical connection, Knock Sensor Bank 2 harness is open or shorted.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P06B7 GMC Description
The control module learns a minimum noise level, or background noise, at idle from the knock sensor and uses calibrated values for the rest of the RPM range. The control module uses the minimum noise level to calculate a noise channel. A normal knock sensor signal will ride within the noise channel. As engine speed and load change, the noise channel upper and lower parameters will change to accommodate the normal knock sensor signal, keeping the signal within the channel. In order to determine which cylinders are knocking, the control module only uses knock sensor signal information when each cylinder is near the Top Dead Center (TDC) of the firing stroke. If a knock is present, the signal will range outside of the noise channel.
If the control module has determined that a knock is present, it will retard the ignition timing to attempt to eliminate the knock. The control module will always try to work back to a zero-compensation level, or no spark retard. An abnormal knock sensor signal will stay outside of the noise channel or will not be present. knock sensor diagnostics are calibrated to detect faults with the knock sensor circuitry inside the control module, the knock sensor wiring, or the knock sensor voltage output. Some diagnostics are also calibrated to detect constant noise from an outside influence such as a loose/damaged component or excessive engine mechanical noise.
The Diagnostic Trouble Code (DTC) will be set when a fault of the processor that evaluates the knock sensor signal was detected.
What are the Possible Causes of the DTC P06B7 GMC?
- Faulty Knock Sensor Bank 2
- Knock Sensor Bank 2 circuit poor electrical connection
- Knock Sensor Bank 2 harness is open or shorted
- Faulty Engine Control Module (ECM)
How to Fix the DTC P06B7 GMC?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P06B7 GMC code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P06B7 GMC code?
Need more information on how to fix the P06B7 GMC code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P06B7 GMC code diagnosed by a professional: Find a repair shop in your area
Information for Specific GMC Models
- P06B7 2014 GMC Sierra — Control Module Knock Sensor Processor 2 Performance
- P06B7 2015 GMC Sierra — Control Module Knock Sensor Processor 2 Performance
- P06B7 2016 GMC Sierra — Control Module Knock Sensor Processor 2 Performance
- P06B7 2017 GMC Sierra — Control Module Knock Sensor Processor 2 Performance
- P06B7 2018 GMC Sierra — Control Module Knock Sensor Processor 2 Performance
Frequently Asked Questions about P06B7 GMC Code
1. What does the OBDII code P06B7 mean on a GMC vehicle?
P06B7 indicates an issue with the performance of the Control Module Knock Sensor Processor 2, which is responsible for monitoring and processing data from the knock sensor to optimize engine performance.
2. What are the common symptoms of code P06B7 in a GMC?
Symptoms may include the check engine light turning on, poor engine performance, reduced fuel efficiency, engine knocking sounds, or difficulty accelerating.
3. What causes the P06B7 code to appear in GMC vehicles?
Common causes include a malfunctioning knock sensor, damaged wiring or connectors, a faulty Engine Control Module (ECM), or software issues within the ECM.
4. Can I drive my GMC with a P06B7 code?
It’s not recommended to drive for an extended period with this code, as it can lead to engine damage due to improper timing adjustments caused by inaccurate knock sensor readings.
5. How is code P06B7 diagnosed?
A mechanic will use a scan tool to confirm the code, inspect the knock sensor and its wiring, check for loose or corroded connections, and test the ECM for proper functionality.
6. How do I fix the P06B7 code on my GMC?
Repairs may include replacing the knock sensor, repairing damaged wiring or connectors, updating the ECM software, or, in rare cases, replacing the ECM.
7. How much does it cost to fix a P06B7 code on a GMC?
Repair costs vary depending on the issue, but replacing a knock sensor typically costs $200–$400, while ECM repairs or replacements can range from $500–$1,500.
8. Can a software update resolve the P06B7 code on a GMC?
Yes, if the issue is related to outdated ECM software, a software update may resolve the problem.
9. What tools are needed to diagnose the P06B7 code?
A professional-grade OBDII scanner, a multimeter for checking wiring and connections, and possibly a scope to test the knock sensor signal may be required.
10. What happens if the P06B7 code is ignored?
Ignoring this code can lead to engine knock, reduced performance, increased emissions, and potential long-term damage to the engine.
Discuss the causes and fixes for P06B7 GMC OBDII Code
Code P06B7 GMC comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
