P06AF Chrysler Code - Torque Management System Forced Engine Shutdown
Quick Answer
To improve shift feel, the Transmission Control Module (TCM) may request that the Engine Control Module (ECM) reduce engine torque during shift events. Common causes include Faulty Engine Control Module (ECM), Faulty Transmission Control Module (TCM), Engine Control Module software update. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P06AF Chrysler indicates Torque Management System Forced Engine Shutdown.
- Common causes
- Common causes include Faulty Engine Control Module (ECM), Faulty Transmission Control Module (TCM), Engine Control Module software update.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P06AF Chrysler Description
The torque reduction request is sent to the ECM through a communication network called the controller area network (CAN). Two circuits are used to communicate CAN data between the ECM and TCM.
A fault in the CAN will not cause the ECM to set the Diagnostic Trouble Codes (DTC). If a CAN fault occurs, other DTCs will set before this code.
The ECM set the OBDII code when the TCM receives a torque reduction failure message from the ECM.
What are the Possible Causes of the DTC P06AF Chrysler?
- Faulty Engine Control Module (ECM)
- Faulty Transmission Control Module (TCM)
- Engine Control Module software update
- Transmission Control Module software update
- Engine Control Module harness is open or shorted
- Engine Control Module circuit poor electrical connection
How to Fix the DTC P06AF Chrysler?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P06AF Chrysler code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P06AF Chrysler code?
Need more information on how to fix the P06AF Chrysler code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P06AF Chrysler code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P06AF Chrysler Code
1. What are the common symptoms of OBDII code P06AF in a Chrysler vehicle?
The common symptoms of P06AF include engine stalling, rough idling, loss of power, and potentially a check engine light on the dashboard.
2. What does the OBDII code P06AF Chrysler signify?
P06AF indicates a Torque Management System Forced Engine Shutdown issue in Chrysler vehicles.
3. What are the possible causes of OBDII code P06AF in a Chrysler car?
Potential causes of P06AF can include a faulty torque management system sensor, wiring issues, software malfunctions, or a problem with the engine control module (ECM).
4. How can I diagnose the OBDII code P06AF in my Chrysler vehicle?
Diagnosing P06AF typically involves using an OBDII scanner to retrieve the code, checking for any other related codes, inspecting the torque management system components, and testing the sensor and wiring for faults.
5. How can I repair OBDII code P06AF in my Chrysler car?
Repairing P06AF may involve replacing the faulty torque management system sensor, repairing any damaged wiring, updating the software if necessary, or replacing the engine control module (ECM) if deemed faulty.
6. Can driving with OBDII code P06AF cause further damage to my Chrysler vehicle?
Continued driving with P06AF may lead to further engine performance issues, potential stalling while driving, and increased risk of safety hazards on the road. It is recommended to address the issue promptly.
7. Is it safe to continue driving my Chrysler vehicle with the Torque Management System Forced Engine Shutdown issue?
It is not recommended to drive your Chrysler vehicle with the P06AF code present, as it can lead to unexpected engine shutdowns and potential safety risks. It is advisable to have the issue diagnosed and repaired as soon as possible.
8. How much does it typically cost to repair OBDII code P06AF in a Chrysler car?
The cost of repairing P06AF can vary depending on the specific cause of the issue, parts needed for replacement, labor costs, and dealership or mechanic pricing. It is best to get a diagnostic and repair quote from a professional.
9. Can I reset the OBDII code P06AF in my Chrysler vehicle on my own?
While you can clear the code using an OBDII scanner, it is important to address the underlying issue causing P06AF to prevent it from recurring. Simply resetting the code without proper diagnosis and repair may lead to ongoing problems.
10. Will fixing OBDII code P06AF improve the overall performance of my Chrysler vehicle?
Correcting the Torque Management System Forced Engine Shutdown issue indicated by P06AF can help restore proper engine performance, prevent stalling, and improve the overall driving experience in your Chrysler vehicle.
Discuss the causes and fixes for P06AF Chrysler OBDII Code
Code P06AF Chrysler comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
