P06AF 2016 Chevrolet Silverado Code - Torque Management System Performance Forced Engine Shutdown
Quick Answer
The generator control module also called the starter/generator control module, is comprised of the following three control modules: the hybrid/EV powertrain control module 1, 14 V power module and the drive motor control module. Common causes include Faulty Starter/Generator Control Module, Starter/Generator Control Module harness is open or shorted, Starter/Generator Control Module circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P06AF 2016 Chevrolet Silverado indicates Torque Management System Performance Forced Engine Shutdown.
- Common causes
- Common causes include Faulty Starter/Generator Control Module, Starter/Generator Control Module harness is open or shorted, Starter/Generator Control Module circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P06AF 2016 Chevrolet Silverado Description
The hybrid/EV powertrain control module 1 monitors a state of health message that the ECM transmits to verify the ECM is functioning properly.
The Diagnostic Trouble Code (DTC) will be set when the Hybrid/EV Powertrain Control Module 1 does not detect a valid state of health message from the ECM.
What are the Possible Causes of the DTC P06AF 2016 Chevrolet Silverado?
- Faulty Starter/Generator Control Module
- Starter/Generator Control Module harness is open or shorted
- Starter/Generator Control Module circuit poor electrical connection
- Faulty Engine Control Module (ECM)
How to Fix the DTC P06AF 2016 Chevrolet Silverado?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P06AF 2016 Chevrolet Silverado code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P06AF 2016 Chevrolet Silverado code?
Need more information on how to fix the P06AF 2016 Chevrolet Silverado code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P06AF 2016 Chevrolet Silverado code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P06AF 2016 Chevrolet Silverado Code
1. What are the common symptoms of OBDII code P06AF in a 2016 Chevrolet Silverado?
- Common symptoms include reduced engine power, engine stalling, and the vehicle going into a forced shutdown mode.
2. What does the OBDII code P06AF indicate in a 2016 Chevrolet Silverado?
- The code P06AF indicates a Torque Management System Performance issue leading to a forced engine shutdown.
3. What are the possible causes of OBDII code P06AF in a 2016 Chevrolet Silverado?
- Possible causes include a faulty torque management system sensor, wiring issues, software glitches, or a malfunctioning engine control module (ECM).
4. How can I diagnose the OBDII code P06AF in my 2016 Chevrolet Silverado?
- Diagnosing the code may require using an OBDII scanner to retrieve the fault codes, conducting a visual inspection of the wiring, and testing the torque management system components.
5. Can I continue driving my 2016 Chevrolet Silverado with the OBDII code P06AF present?
- It is not recommended to continue driving the vehicle with the code active, as it may result in engine performance issues or forced shutdowns, potentially causing safety concerns.
6. How can I repair the OBDII code P06AF in my 2016 Chevrolet Silverado?
- Repairing the code may involve replacing the faulty torque management system sensor, repairing any wiring issues, updating the ECM software, or recalibrating the torque management system.
7. Is it possible to reset the OBDII code P06AF in a 2016 Chevrolet Silverado by disconnecting the battery?
- Disconnecting the battery may clear the code temporarily, but it is recommended to address the underlying issue causing the code to prevent it from reoccurring.
8. Will the OBDII code P06AF in a 2016 Chevrolet Silverado cause permanent damage to the vehicle?
- If left unresolved, the code may lead to further engine performance issues or potential damage over time, so it is important to address the issue promptly.
9. Can a DIY enthusiast fix the OBDII code P06AF in a 2016 Chevrolet Silverado?
- Depending on the underlying cause, some DIY enthusiasts may be able to address the issue by following repair guides and utilizing basic tools, but more complex issues may require professional assistance.
10. How can I prevent the OBDII code P06AF from recurring in my 2016 Chevrolet Silverado?
- Regular maintenance, timely repairs of related components, and addressing any underlying issues promptly can help prevent the code from recurring in the future.
Discuss the causes and fixes for P06AF 2016 Chevrolet Silverado OBDII Code
Code P06AF 2016 Chevrolet Silverado comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
