P06AF 2015 GMC Sierra Code - Torque Management System Performance Forced Engine Shutdown
Quick Answer
The generator control module also called the starter/generator control module, is comprised of the following three control modules: the hybrid/EV powertrain control module 1, 14 V power module and the drive motor control module. Common causes include Faulty Starter/Generator Control Module, Starter/Generator Control Module harness is open or shorted, Starter/Generator Control Module circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P06AF 2015 GMC Sierra indicates Torque Management System Performance Forced Engine Shutdown.
- Common causes
- Common causes include Faulty Starter/Generator Control Module, Starter/Generator Control Module harness is open or shorted, Starter/Generator Control Module circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P06AF 2015 GMC Sierra Description
The hybrid/EV powertrain control module 1 monitors a state of health message that the ECM transmits to verify the ECM is functioning properly.
The Diagnostic Trouble Code (DTC) will be set when the Hybrid/EV Powertrain Control Module 1 does not detect a valid state of health message from the ECM.
What are the Possible Causes of the DTC P06AF 2015 GMC Sierra?
- Faulty Starter/Generator Control Module
- Starter/Generator Control Module harness is open or shorted
- Starter/Generator Control Module circuit poor electrical connection
- Faulty Engine Control Module (ECM)
How to Fix the DTC P06AF 2015 GMC Sierra?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P06AF 2015 GMC Sierra code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P06AF 2015 GMC Sierra code?
Need more information on how to fix the P06AF 2015 GMC Sierra code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P06AF 2015 GMC Sierra code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P06AF 2015 GMC Sierra Code
1. What are the common symptoms of OBDII code P06AF in a 2015 GMC Sierra?
- Common symptoms include reduced engine power, illuminated Check Engine light, and potential engine shutdown while driving.
2. What does the OBDII code P06AF for Torque Management System Performance Forced Engine Shutdown mean?
- This code indicates that the vehicle's engine control module has detected a fault with the torque management system, potentially leading to forced engine shutdown.
3. What are some possible causes of OBDII code P06AF in a 2015 GMC Sierra?
- Possible causes include a faulty torque management system sensor, wiring issues, software glitches in the engine control module, or a malfunctioning torque management system itself.
4. How can I diagnose the OBDII code P06AF in my 2015 GMC Sierra?
- Diagnosing this code typically requires a professional scan tool to retrieve the specific trouble codes and perform live data monitoring to pinpoint the issue within the torque management system.
5. Can I continue driving my GMC Sierra with the OBDII code P06AF present?
- It is not recommended to continue driving the vehicle with this code active, as it may result in sudden engine shutdown and potentially unsafe driving conditions.
6. How can I repair OBDII code P06AF in my 2015 GMC Sierra?
- Repair options may include inspecting and repairing wiring connections, replacing faulty sensors or components within the torque management system, and resetting the engine control module.
7. Is it safe to reset the Check Engine light after addressing the OBDII code P06AF?
- Yes, it is safe to reset the Check Engine light after resolving the issue causing the P06AF code, but it's important to ensure the problem has been fully fixed to prevent it from reoccurring.
8. Can a DIY enthusiast fix the OBDII code P06AF issue in a 2015 GMC Sierra?
- While some basic troubleshooting steps can be taken by a DIY enthusiast, diagnosing and repairing the root cause of the P06AF code may require specialized tools and expertise best handled by a professional mechanic.
9. How much does it typically cost to repair the OBDII code P06AF in a 2015 GMC Sierra?
- Repair costs for this code can vary depending on the specific cause of the issue, but they may range from a few hundred to over a thousand dollars, including parts and labor.
10. Are there any preventive maintenance measures to avoid encountering the OBDII code P06AF in the future?
- Regularly servicing and maintaining the torque management system, as well as promptly addressing any related warning signs or symptoms, can help prevent the recurrence of the P06AF code in the future.
Discuss the causes and fixes for P06AF 2015 GMC Sierra OBDII Code
Code P06AF 2015 GMC Sierra comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
