P06AF 2014 Chevrolet Silverado_c15_2wd Code - Torque Management System Performance Forced Engine Shutdown
Quick Answer
The generator control module also called the starter/generator control module, is comprised of the following three control modules: the hybrid/EV powertrain control module 1, 14 V power module and the drive motor control module. Common causes include Faulty Starter/Generator Control Module, Starter/Generator Control Module harness is open or shorted, Starter/Generator Control Module circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P06AF 2014 Chevrolet Silverado_c15_2wd indicates Torque Management System Performance Forced Engine Shutdown.
- Common causes
- Common causes include Faulty Starter/Generator Control Module, Starter/Generator Control Module harness is open or shorted, Starter/Generator Control Module circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P06AF 2014 Chevrolet Silverado_c15_2wd Description
The hybrid/EV powertrain control module 1 monitors a state of health message that the ECM transmits to verify the ECM is functioning properly.
The Diagnostic Trouble Code (DTC) will be set when the Hybrid/EV Powertrain Control Module 1 does not detect a valid state of health message from the ECM.
What are the Possible Causes of the DTC P06AF 2014 Chevrolet Silverado_c15_2wd?
- Faulty Starter/Generator Control Module
- Starter/Generator Control Module harness is open or shorted
- Starter/Generator Control Module circuit poor electrical connection
- Faulty Engine Control Module (ECM)
How to Fix the DTC P06AF 2014 Chevrolet Silverado_c15_2wd?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P06AF 2014 Chevrolet Silverado_c15_2wd code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P06AF 2014 Chevrolet Silverado_c15_2wd code?
Need more information on how to fix the P06AF 2014 Chevrolet Silverado_c15_2wd code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P06AF 2014 Chevrolet Silverado_c15_2wd code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P06AF 2014 Chevrolet Silverado_c15_2wd Code
What does the OBDII code P06AF mean on a 2014 Chevrolet Silverado 2WD?
P06AF indicates an issue with the Torque Management System, specifically related to forced engine shutdown performance.
What are the common symptoms of code P06AF in a 2014 Chevrolet Silverado?
Symptoms include reduced engine power, unexpected engine shutdown, difficulty accelerating, and possible warning lights on the dashboard.
What causes the P06AF code to appear on a 2014 Chevrolet Silverado?
Common causes include a faulty torque management module, wiring or connectivity issues, or software glitches in the engine control module (ECM).
Can driving with code P06AF damage my 2014 Chevrolet Silverado?
Yes, prolonged driving with this code can lead to reduced performance, potential engine damage, or unsafe driving conditions due to unexpected shutdowns.
How can I diagnose the P06AF code on my 2014 Chevrolet Silverado?
Use an OBDII scanner to confirm the code, inspect wiring and connections, and check for any faults in the torque management system or ECM.
Is the P06AF code related to other issues in the vehicle?
It can be linked to other performance-related codes or issues with the transmission and engine systems.
What repairs are commonly needed for the P06AF code?
Repairs may include replacing the torque management module, repairing damaged wiring, or reprogramming the ECM.
How much does it cost to fix code P06AF on a 2014 Chevrolet Silverado?
Repair costs vary but can range from $150 to $800 depending on whether components need replacement or reprogramming.
Can resetting the ECM fix code P06AF in my Silverado?
Resetting the ECM may temporarily clear the code, but the underlying issue must be addressed to prevent it from returning.
Should I take my 2014 Chevrolet Silverado to a mechanic for code P06AF?
Yes, consulting a professional mechanic is recommended to ensure proper diagnosis and repair of the torque management system.
Discuss the causes and fixes for P06AF 2014 Chevrolet Silverado_c15_2wd OBDII Code
Code P06AF 2014 Chevrolet Silverado_c15_2wd comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
