P06AD GMC Code - Control Module Power Up Temperature Sensor Circuit Low Voltage
Quick Answer
The Transmission Control Module (TCM) power-up temperature sensor is located inside of the control solenoid valve assembly which has no serviceable parts. Common causes include Faulty Control Solenoid Valve Assembly. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P06AD GMC indicates Control Module Power Up Temperature Sensor Circuit Low Voltage.
- Common causes
- Common causes include Faulty Control Solenoid Valve Assembly.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P06AD GMC Description
What are the Possible Causes of the DTC P06AD GMC?
- Faulty Control Solenoid Valve Assembly
How to Fix the DTC P06AD GMC?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P06AD GMC code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P06AD GMC code?
Need more information on how to fix the P06AD GMC code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P06AD GMC code diagnosed by a professional: Find a repair shop in your area
Information for Specific GMC Models
- P06AD 2014 GMC Sierra — Control Module Power Up Temperature Sensor Circuit Low Voltage
- P06AD 2015 GMC Sierra — Control Module Power Up Temperature Sensor Circuit Low Voltage
- P06AD 2016 GMC Sierra — Control Module Power Up Temperature Sensor Circuit Low Voltage
- P06AD 2017 GMC Sierra — Control Module Power Up Temperature Sensor Circuit Low Voltage
- P06AD 2018 GMC Sierra — Control Module Power Up Temperature Sensor Circuit Low Voltage
Frequently Asked Questions about P06AD GMC Code
1. What does the OBDII code P06AD mean on a GMC vehicle?
P06AD indicates that the Control Module Power Up Temperature Sensor Circuit is experiencing low voltage, which could affect the vehicle's ability to monitor temperature during startup.
2. What are the common symptoms of a P06AD code in a GMC?
Symptoms may include the check engine light turning on, difficulty starting the engine, erratic temperature readings, or reduced engine performance.
3. What causes the P06AD code to appear on a GMC?
Potential causes include a faulty temperature sensor, damaged wiring or connectors in the sensor circuit, or a malfunctioning control module.
4. How do I diagnose a P06AD code in my GMC?
Start by inspecting the wiring and connectors for damage or corrosion, test the temperature sensor for proper operation, and check the control module for any related faults.
5. Can I drive my GMC with a P06AD code?
While the vehicle may still be drivable, ignoring the issue could lead to engine performance problems or further damage. It's best to address the code promptly.
6. How do I fix the P06AD code on my GMC?
Repairs may include replacing the temperature sensor, repairing or replacing damaged wiring or connectors, or reprogramming or replacing the control module if necessary.
7. How much does it cost to fix the P06AD code on a GMC?
The repair cost can vary depending on the exact issue, but replacing a temperature sensor typically costs around $100 to $300, while control module repairs or replacements may cost significantly more.
8. Can a dead battery trigger a P06AD code on a GMC?
Yes, a weak or dead battery can cause low voltage in the system, potentially triggering this code. Ensure the battery is in good condition before further diagnostics.
9. Will clearing the P06AD code fix the issue on my GMC?
Clearing the code may turn off the check engine light temporarily, but the underlying problem must be addressed to prevent the code from returning.
10. What tools are needed to diagnose and fix a P06AD code on a GMC?
You may need an OBDII scanner, a multimeter for testing voltage, and basic hand tools for inspecting and repairing the sensor and wiring.
Discuss the causes and fixes for P06AD GMC OBDII Code
Code P06AD GMC comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
