AutoCodes – Hyundai – P06A4 Hyundai

P06A4 Hyundai Code - Sensor Reference Voltage 'D' Circuit Low

Quick Answer

The control module has internal 5-volt reference buses called "5-volt reference". Common causes include Faulty Engine Control Module (ECM), ECM harness is open or shorted, ECM circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P06A4 Hyundai indicates Sensor Reference Voltage 'D' Circuit Low.
Common causes: Common causes include Faulty Engine Control Module (ECM), ECM harness is open or shorted, ECM circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 8,782

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on May 08, 2019

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P06A4 Hyundai Description

The control module has internal 5-volt reference buses called "5-volt reference". Each reference bus provided 5-volt reference circuit for more than one sensor. Therefore, a fault condition on one 5-volt reference circuit will affect the other 5-volt reference circuits connected to the reference bus. The control module monitors the voltage on the 5-volt reference buses.

OBDII Code P06A4 Hyundai - Sensor Reference Voltage 'D' Circuit Low - AutoCodes.com — P06A4 Hyundai Code - Sensor Reference Voltage 'D' Circuit Low

What does this mean?

What are the Possible Causes of the DTC P06A4 Hyundai?

Faulty Engine Control Module (ECM)
ECM harness is open or shorted
ECM circuit poor electrical connection
Shorted sensor on 5 volt circuit

How to Fix the DTC P06A4 Hyundai?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P06A4 Hyundai code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P06A4 Hyundai code?

Need more information on how to fix the P06A4 Hyundai code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P06A4 Hyundai code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P06A4 Hyundai Code

1. What are the common symptoms of OBDII code P06A4 in a Hyundai related to the Sensor Reference Voltage 'D' Circuit Low?

The common symptoms include poor engine performance, rough idling, stalling, and possibly an illuminated check engine light.

2. What are the possible causes of the Sensor Reference Voltage 'D' Circuit Low OBDII code in a Hyundai?

Potential causes of this code include a faulty sensor, damaged wiring or connectors, a malfunctioning Engine Control Module (ECM), or a low voltage condition in the circuit.

3. How can I diagnose the Sensor Reference Voltage 'D' Circuit Low issue in my Hyundai?

To diagnose this issue, you can use an OBDII scanner to retrieve the specific trouble code. Then, perform a visual inspection of the wiring and connectors, test the sensor, and check voltage levels in the circuit.

4. Can I continue driving my Hyundai with the P06A4 trouble code present?

It is not recommended to continue driving your Hyundai with the P06A4 code, as it can lead to further engine damage and potential safety issues. It is best to address the issue promptly.

5. How can I repair the Sensor Reference Voltage 'D' Circuit Low problem in my Hyundai?

The repair process may involve replacing the faulty sensor, repairing or replacing damaged wiring, ensuring proper connection of connectors, or reprogramming the ECM if necessary.

6. Is it possible to reset the OBDII code P06A4 in a Hyundai without fixing the underlying issue?

While you can clear the trouble code with an OBDII scanner, it is crucial to address the root cause of the problem to prevent the code from reappearing.

7. Can a DIY enthusiast fix the Sensor Reference Voltage 'D' Circuit Low issue in a Hyundai?

Depending on your skill level and access to tools, you may be able to address this problem yourself by following repair guides or seeking assistance from online forums. However, complex issues may require professional intervention.

8. Will fixing the Sensor Reference Voltage 'D' Circuit Low problem improve my Hyundai's fuel efficiency?

Resolving the P06A4 code may lead to improved engine performance and efficiency, as the sensor-related issue can impact fuel delivery and combustion processes.

9. How long does it typically take to repair the Sensor Reference Voltage 'D' Circuit Low issue in a Hyundai?

The repair time can vary depending on the exact cause of the problem and the complexity of the repair. It may range from a quick sensor replacement to more extensive troubleshooting and repairs.

10. Is the Sensor Reference Voltage 'D' Circuit Low OBDII code a common issue in Hyundai vehicles?

While not as common as some other OBDII codes, the P06A4 code related to the Sensor Reference Voltage 'D' Circuit Low can still occur in Hyundai vehicles due to various factors impacting sensor performance and circuit voltage.