AutoCodes – Jeep – P06A3 Jeep

P06A3 Jeep Code - Sensor Reference Voltage 'D' Circuit/Open

Quick Answer

The control module has internal 5-volt reference buses called "5-volt reference". Common causes include Faulty Engine Control Module (ECM), ECM harness is open or shorted, ECM circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P06A3 Jeep indicates Sensor Reference Voltage 'D' Circuit/Open.
Common causes: Common causes include Faulty Engine Control Module (ECM), ECM harness is open or shorted, ECM circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 1,114

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on May 08, 2019

Description
Possible Causes
How To Fix
Cost to Diagnose
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P06A3 Jeep Description

The control module has internal 5-volt reference buses called "5-volt reference". Each reference bus provided 5-volt reference circuit for more than one sensor. Therefore, a fault condition on one 5-volt reference circuit will affect the other 5-volt reference circuits connected to the reference bus. The control module monitors the voltage on the 5-volt reference buses.

OBDII Code P06A3 Jeep - Sensor Reference Voltage 'D' Circuit/Open - AutoCodes.com — P06A3 Jeep Code - Sensor Reference Voltage 'D' Circuit/Open

What does this mean?

What are the Possible Causes of the DTC P06A3 Jeep?

Faulty Engine Control Module (ECM)
ECM harness is open or shorted
ECM circuit poor electrical connection
Shorted sensor on 5 volt circuit

How to Fix the DTC P06A3 Jeep?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P06A3 Jeep code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P06A3 Jeep code?

Need more information on how to fix the P06A3 Jeep code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P06A3 Jeep code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.