AutoCodesSuzuki – P0698 Suzuki

P0698 Suzuki Code - 5 Volt Reference 3 Circuit Low Voltage

Quick Answer

The control module has internal 5-volt reference buses called "5-volt reference". Common causes include Faulty Engine Control Module (ECM), ECM harness is open or shorted, ECM circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
P0698 Suzuki indicates 5 Volt Reference 3 Circuit Low Voltage.
Common causes
Common causes include Faulty Engine Control Module (ECM), ECM harness is open or shorted, ECM circuit poor electrical connection.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
AI answers can be wrong. Verify repairs with testing. Open full chat
Code Popularity 4,858
How popular is this code, among other codes? Low
Table of contents Created and updated by William Orellana on May 06, 2019
💬 Need more help? Ask Coddy for instant answers — it's free!

Code P0698 Suzuki Description

The control module has internal 5-volt reference buses called "5-volt reference". Each reference bus provided 5-volt reference circuit for more than one sensor. Therefore, a fault condition on one 5-volt reference circuit will affect the other 5-volt reference circuits connected to the reference bus. The control module monitors the voltage on the 5-volt reference buses.
OBDII Code P0698 Suzuki - 5 Volt Reference 3 Circuit Low Voltage - AutoCodes.com
P0698 Suzuki Code - 5 Volt Reference 3 Circuit Low Voltage

What are the Possible Causes of the DTC P0698 Suzuki?

  • Faulty Engine Control Module (ECM)
  • ECM harness is open or shorted
  • ECM circuit poor electrical connection
  • Shorted sensor on 5 volt circuit

How to Fix the DTC P0698 Suzuki?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P0698 Suzuki code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P0698 Suzuki code?

Need more information on how to fix the P0698 Suzuki code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0698 Suzuki code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0698 Suzuki Code

1. What does the OBDII code P0698 mean in a Suzuki?

P0698 indicates a low voltage issue in the "5 Volt Reference 3" circuit, which supplies power to certain engine sensors.

2. What are the common symptoms of code P0698 in a Suzuki?

Symptoms may include poor engine performance, rough idling, stalling, or the Check Engine Light being illuminated.

3. What causes the P0698 code in a Suzuki?

Common causes include damaged wiring, corroded connectors, a failing sensor, or a malfunctioning Engine Control Module (ECM).

4. How do I diagnose the P0698 code in my Suzuki?

Start by inspecting the wiring and connectors in the 5V reference circuit for damage or corrosion, then test the voltage and resistance at the affected sensor.

5. Can I drive my Suzuki with a P0698 code?

While the vehicle may still run, driving with this code can lead to poor performance or additional damage to the engine or sensors, so it’s best to address it promptly.

6. Which sensors typically rely on the 5 Volt Reference 3 circuit in a Suzuki?

Sensors such as the throttle position sensor (TPS), manifold absolute pressure (MAP) sensor, or fuel pressure sensor may use this circuit.

7. How do I fix the P0698 code in my Suzuki?

Repairs may include replacing damaged wiring, cleaning or replacing corroded connectors, repairing the affected sensor, or, in rare cases, replacing the ECM.

8. How much does it cost to fix the P0698 code in a Suzuki?

Repair costs can vary widely depending on the issue, but sensor replacements typically range from $100 to $300, while ECM repairs can cost significantly more.

9. Can a bad battery cause the P0698 code in a Suzuki?

While uncommon, a weak or failing battery can contribute to voltage issues in the system, potentially triggering this code.

10. Do I need to clear the P0698 code after repairs?

Yes, after performing repairs, use an OBDII scanner to clear the code and verify if it reappears during a test drive.

Discuss the causes and fixes for P0698 Suzuki OBDII Code

Code P0698 Suzuki comments

No comments found for this page.

AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play