AutoCodesSubaru – P0692 Subaru

P0692 Subaru Code - Cooling Fan 1 Control Circuit High

Quick Answer

The Engine Cooling Fan is normally controlled by the Engine Control Module (ECM). Common causes include Faulty Fan 1 Relay, Fan 1 Relay harness is open or shorted, Fan 1 Relay circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
P0692 Subaru indicates Cooling Fan 1 Control Circuit High.
Common causes
Common causes include Faulty Fan 1 Relay, Fan 1 Relay harness is open or shorted, Fan 1 Relay circuit poor electrical connection.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
AI answers can be wrong. Verify repairs with testing. Open full chat
Code Popularity 9,610
How popular is this code, among other codes? Low
Table of contents Created and updated by William Orellana on Apr 20, 2021
💬 Need more help? Ask Coddy for instant answers — it's free!

Code P0692 Subaru Description

The Engine Cooling Fan is normally controlled by the Engine Control Module (ECM). Some cooling fans can be controlled by a pulse width modulated control voltage. This allows for varying speeds depending on the rate of engine cooling required. Conversely, where two fans are used on a vehicle, they can either be powered up in series or in parallel. When in series both fans will rotate at low speed, when connected in parallel then both fans will operate at full speed. In the event of a temperature sensor failure, the fan will operate at full output.
OBDII Code P0692 Subaru - Cooling Fan 1 Control Circuit High - AutoCodes.com
P0692 Subaru Code - Cooling Fan 1 Control Circuit High

What are the Possible Causes of the DTC P0692 Subaru?

  • Faulty Fan 1 Relay
  • Fan 1 Relay harness is open or shorted
  • Fan 1 Relay circuit poor electrical connection
  • Faulty Fan 1
  • Fan 1 harness is open or shorted
  • Fan 1 circuit poor electrical connection
  • Faulty Engine Control Module (ECM)

How to Fix the DTC P0692 Subaru?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P0692 Subaru code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P0692 Subaru code?

Need more information on how to fix the P0692 Subaru code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0692 Subaru code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0692 Subaru Code

1. What does OBDII code P0692 mean on a Subaru?

P0692 indicates a problem with the Cooling Fan 1 Control Circuit, specifically that the circuit voltage is higher than expected.

2. What are the common symptoms of P0692 in a Subaru?

Symptoms may include overheating, the cooling fan not operating correctly, and an illuminated check engine light.

3. What causes the P0692 code to appear?

Common causes include a faulty cooling fan relay, damaged wiring, a short circuit, or a malfunctioning cooling fan motor.

4. Can I drive my Subaru with code P0692?

Driving with this code could lead to engine overheating, which may cause serious damage. It is best to address the issue promptly.

5. How do I diagnose the P0692 code on a Subaru?

Diagnosis may involve inspecting the cooling fan relay, checking the wiring and connectors for damage, and testing the cooling fan motor for proper operation.

6. How do I fix the P0692 code on my Subaru?

Repairs may include replacing a faulty cooling fan relay, repairing damaged wiring, or replacing the cooling fan motor if it’s defective.

7. What tools do I need to troubleshoot P0692?

You’ll need an OBDII scanner, a multimeter to check voltage, and possibly wiring diagrams for your Subaru’s cooling fan system.

8. How much does it cost to repair code P0692 on a Subaru?

Repair costs can vary widely, but replacing a cooling fan relay may cost $50-$150, while fan motor replacement can cost $300-$500, plus labor.

9. Will resetting the code fix P0692 on a Subaru?

Resetting the code without repairing the underlying issue will not fix the problem; the code is likely to return.

10. Can a bad ECU cause the P0692 code on a Subaru?

While rare, a malfunctioning ECU could potentially cause this code, but it’s more likely to be a problem with the relay, wiring, or fan motor.

Discuss the causes and fixes for P0692 Subaru OBDII Code

Code P0692 Subaru comments

No comments found for this page.

AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play