AutoCodes – Jeep – P0692 Jeep

P0692 Jeep Code - Cooling Fan 1 Control Circuit High

Quick Answer

The Engine Cooling Fan is normally controlled by the Engine Control Module (ECM). Common causes include Faulty Fan 1 Relay, Fan 1 Relay harness is open or shorted, Fan 1 Relay circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P0692 Jeep indicates Cooling Fan 1 Control Circuit High.
Common causes: Common causes include Faulty Fan 1 Relay, Fan 1 Relay harness is open or shorted, Fan 1 Relay circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 4,762

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Apr 20, 2021

Description
Possible Causes
How To Fix
Cost to Diagnose
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P0692 Jeep Description

The Engine Cooling Fan is normally controlled by the Engine Control Module (ECM). Some cooling fans can be controlled by a pulse width modulated control voltage. This allows for varying speeds depending on the rate of engine cooling required. Conversely, where two fans are used on a vehicle, they can either be powered up in series or in parallel. When in series both fans will rotate at low speed, when connected in parallel then both fans will operate at full speed. In the event of a temperature sensor failure, the fan will operate at full output.

OBDII Code P0692 Jeep - Cooling Fan 1 Control Circuit High - AutoCodes.com — P0692 Jeep Code - Cooling Fan 1 Control Circuit High

What does this mean?

What are the Possible Causes of the DTC P0692 Jeep?

Faulty Fan 1 Relay
Fan 1 Relay harness is open or shorted
Fan 1 Relay circuit poor electrical connection
Faulty Fan 1
Fan 1 harness is open or shorted
Fan 1 circuit poor electrical connection
Faulty Engine Control Module (ECM)

How to Fix the DTC P0692 Jeep?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P0692 Jeep code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P0692 Jeep code?

Need more information on how to fix the P0692 Jeep code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0692 Jeep code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.