P0692 2014 Chevrolet Silverado Code - Cooling Fan Speed Output Circuit High Voltage
Quick Answer
The engine cooling fan system is composed of 2 electric cooling fans, fan motors, and 2 control modules. Common causes include Faulty Cooling Fan Control Module, Cooling Fan Control Module harness is open or shorted, Cooling Fan Control Module circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0692 2014 Chevrolet Silverado indicates Cooling Fan Speed Output Circuit High Voltage.
- Common causes
- Common causes include Faulty Cooling Fan Control Module, Cooling Fan Control Module harness is open or shorted, Cooling Fan Control Module circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0692 2014 Chevrolet Silverado Description
The cooling fan speed is affected by many different conditions and the ECM will adjust the duty cycle from 0 - 100 percent based on cooling system requirements. The scan tool output control is only capable of operating the cooling fan increments, between 10 - 90 percent. 90 percent is considered high-speed fan. When multiple cooling fan speed requests are received, the ECM operates the fan at the highest speed requests.
The Diagnostic Trouble Code (DTC) will be set when the commanded state of the driver and the actual state of the control circuit do not match for greater than 5 s.
What are the Possible Causes of the DTC P0692 2014 Chevrolet Silverado?
- Faulty Cooling Fan Control Module
- Cooling Fan Control Module harness is open or shorted
- Cooling Fan Control Module circuit poor electrical connection
- Faulty Engine Control Module (ECM)
How to Fix the DTC P0692 2014 Chevrolet Silverado?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0692 2014 Chevrolet Silverado code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0692 2014 Chevrolet Silverado code?
Need more information on how to fix the P0692 2014 Chevrolet Silverado code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0692 2014 Chevrolet Silverado code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0692 2014 Chevrolet Silverado Code
What does the OBDII code P0692 mean for a 2014 Chevrolet Silverado?
P0692 indicates a high voltage issue in the cooling fan speed output circuit, often linked to the cooling fan relay or wiring.
What are the symptoms of code P0692 in a 2014 Chevrolet Silverado?
Symptoms may include engine overheating, abnormal fan operation, or the check engine light turning on.
What causes the P0692 code in a 2014 Chevrolet Silverado?
Common causes include a faulty cooling fan relay, damaged wiring or connectors, or a malfunctioning cooling fan control module.
Can I drive my 2014 Chevrolet Silverado with code P0692?
It’s not recommended, as engine overheating could cause severe damage if the cooling fan isn’t functioning properly.
How do I diagnose the P0692 code on a 2014 Chevrolet Silverado?
Start by inspecting the wiring and connectors for damage, test the cooling fan relay, and check the cooling fan control module for faults.
How do I fix the P0692 code on a 2014 Chevrolet Silverado?
Repairs may involve replacing the faulty cooling fan relay, repairing damaged wiring, or replacing the cooling fan control module.
Will a faulty cooling fan relay always trigger the P0692 code?
Not always; other issues like damaged wiring or a defective control module can also cause the code.
How much does it cost to repair the P0692 code in a 2014 Chevrolet Silverado?
Costs vary but typically range from $100 to $300 depending on whether the relay, wiring, or control module needs replacement.
Can a low battery voltage cause the P0692 code?
While low voltage may affect electrical systems, this code specifically points to high voltage in the fan circuit.
Do I need special tools to fix the P0692 code on a 2014 Chevrolet Silverado?
Basic tools like a multimeter and OBDII scanner are sufficient for diagnosing and repairing this code.
Discuss the causes and fixes for P0692 2014 Chevrolet Silverado OBDII Code
Code P0692 2014 Chevrolet Silverado comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
