P0691 Chrysler Code - Cooling Fan 1 Control Circuit Low
Quick Answer
The Engine Control Module (ECM) monitors the Cooling Fan 1 Control Circuit. Common causes include Faulty Fan 1 Relay, Fan 1 Relay harness is open or shorted, Fan 1 Relay circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0691 Chrysler indicates Cooling Fan 1 Control Circuit Low.
- Common causes
- Common causes include Faulty Fan 1 Relay, Fan 1 Relay harness is open or shorted, Fan 1 Relay circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0691 Chrysler Description
What are the Possible Causes of the DTC P0691 Chrysler?
- Faulty Fan 1 Relay
- Fan 1 Relay harness is open or shorted
- Fan 1 Relay circuit poor electrical connection
- Faulty Fan 1
- Fan 1 harness is open or shorted
- Fan 1 circuit poor electrical connection
- Faulty Engine Control Module (ECM)
How to Fix the DTC P0691 Chrysler?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0691 Chrysler code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0691 Chrysler code?
Need more information on how to fix the P0691 Chrysler code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0691 Chrysler code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0691 Chrysler Code
1. What are the common symptoms of OBDII code P0691 in a Chrysler, indicating a Cooling Fan 1 Control Circuit Low issue?
The common symptoms include overheating of the engine, the cooling fan not functioning properly, and the Check Engine light illuminating on the dashboard.
2. What are the possible causes of OBDII code P0691 in a Chrysler related to the Cooling Fan 1 Control Circuit Low problem?
Potential causes include a faulty cooling fan relay, damaged wiring or connectors in the cooling fan circuit, a malfunctioning cooling fan motor, or issues with the powertrain control module (PCM).
3. How can I diagnose the Cooling Fan 1 Control Circuit Low issue associated with OBDII code P0691 in my Chrysler?
You can use a diagnostic scanner to retrieve the trouble code P0691, then inspect the cooling fan relay, wiring, connectors, and the cooling fan motor for any visible damage or loose connections. Testing the components with a multimeter may also help pinpoint the issue.
4. Can a DIY enthusiast repair the Cooling Fan 1 Control Circuit Low problem triggered by OBDII code P0691 in a Chrysler?
Depending on your skill level and access to tools, DIY enthusiasts may be able to repair this issue by replacing the faulty cooling fan relay, repairing damaged wiring or connectors, or replacing the cooling fan motor. However, if the PCM is suspected to be the cause, professional assistance may be necessary.
5. Are there any quick temporary fixes for the Cooling Fan 1 Control Circuit Low issue indicated by OBDII code P0691 in a Chrysler?
While it's not recommended to rely on temporary fixes, you can manually trigger the cooling fan to run at a constant speed using a direct power source as a temporary solution to prevent engine overheating. However, this should only be done for diagnostic purposes and not as a long-term fix.
6. How crucial is it to address the OBDII code P0691 indicating a Cooling Fan 1 Control Circuit Low problem in a Chrysler promptly?
It is essential to address this issue promptly to prevent potential engine overheating, which can lead to more severe damage and costly repairs. Ignoring the problem may result in engine damage or even engine failure due to overheating.
7. Can a malfunctioning cooling fan cause other issues besides triggering the OBDII code P0691 in a Chrysler?
Yes, a malfunctioning cooling fan can lead to engine overheating, reduced fuel efficiency, air conditioning problems, and potential damage to other engine components. It is crucial to address cooling fan issues promptly to avoid these secondary problems.
8. Is it safe to continue driving a Chrysler with the OBDII code P0691 displaying a Cooling Fan 1 Control Circuit Low fault?
It is not recommended to continue driving your Chrysler with the OBDII code P0691 indicating a Cooling Fan 1 Control Circuit Low issue, as it can lead to engine overheating and potential damage. It's best to address the problem as soon as possible to prevent further complications.
9. How much should I expect to pay for repairing the Cooling Fan 1 Control Circuit Low problem associated with OBDII code P0691 in a Chrysler?
The cost of repair can vary depending on the specific cause of the issue and whether you choose to fix it yourself or seek professional help. Costs may range from a few hundred dollars for parts and labor to over a thousand dollars if the PCM needs replacement.
10. Can I prevent the occurrence of the OBDII code P0691 related to the Cooling Fan 1 Control Circuit Low issue in my Chrysler?
Regular maintenance, such as checking the cooling system components, replacing worn-out parts in a timely manner, and monitoring the engine temperature, can help prevent the occurrence of OBDII code P0691 and ensure the proper functioning of the cooling fan system in your Chrysler.
Discuss the causes and fixes for P0691 Chrysler OBDII Code
Code P0691 Chrysler comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
