AutoCodes – Chevrolet – P0690 2018 Chevrolet Silverado

P0690 2018 Chevrolet Silverado Code - Electronic Control Module Power Relay Sense Circuit High

Quick Answer

The powertrain relay is a normally open relay. Common causes include Weak battery, Low voltage while cranking, Faulty Engine Control Module (ECM) power relay. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P0690 2018 Chevrolet Silverado indicates Electronic Control Module Power Relay Sense Circuit High.
Common causes: Common causes include Weak battery, Low voltage while cranking, Faulty Engine Control Module (ECM) power relay.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 432

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Jul 19, 2022

Description
Possible Causes
How To Fix
Cost to Diagnose
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P0690 2018 Chevrolet Silverado Description

The powertrain relay is a normally open relay. The relay armature is held in the open position by spring tension. Battery positive voltage is supplied directly to the relay coil and the armature contact at all times. The Engine Control Module (ECM) supplies the ground path to the relay coil control circuit via an internal integrated circuit called an Output Driver Module (ODM). The ODM output control is configured to operate as a low side driver for the powertrain relay. The ODM for the powertrain relay also incorporates a fault detection circuit, which is continuously monitored by the ECM. When the ECM commands the powertrain relay ON, ignition 1 voltage is supplied to the ECM, and to several additional circuits.

OBDII Code P0690 2018 Chevrolet Silverado - Electronic Control Module Power Relay Sense Circuit High - AutoCodes.com — P0690 2018 Chevrolet Silverado Code - Electronic Control Module Power Relay Sense Circuit High

What does this mean?

What are the Possible Causes of the DTC P0690 2018 Chevrolet Silverado?

Weak battery
Low voltage while cranking
Faulty Engine Control Module (ECM) power relay
ECM power relay harness is open or shorted
ECM power relay circuit poor electrical connection
Blown ECM fuse
Faulty ECM

How to Fix the DTC P0690 2018 Chevrolet Silverado?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P0690 2018 Chevrolet Silverado code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P0690 2018 Chevrolet Silverado code?

Need more information on how to fix the P0690 2018 Chevrolet Silverado code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0690 2018 Chevrolet Silverado code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.