AutoCodes – Chevrolet – P0685 2014 Chevrolet Silverado

P0685 2014 Chevrolet Silverado Code - Engine Control Module Power Relay Control Circuit Open

Quick Answer

The powertrain relay is a normally open relay. Common causes include Weak battery, Low voltage while cranking, Faulty Engine Control Module (ECM) power relay. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
P0685 2014 Chevrolet Silverado indicates Engine Control Module Power Relay Control Circuit Open.
Common causes
Common causes include Weak battery, Low voltage while cranking, Faulty Engine Control Module (ECM) power relay.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
AI answers can be wrong. Verify repairs with testing. Open full chat
Code Popularity 469
How popular is this code, among other codes? Low
Table of contents Created and updated by William Orellana on Jul 19, 2022
πŸ’¬ Need more help? Ask Coddy for instant answers β€” it's free!

Code P0685 2014 Chevrolet Silverado Description

The powertrain relay is a normally open relay. The relay armature is held in the open position by spring tension. Battery positive voltage is supplied directly to the relay coil and the armature contact at all times. The Engine Control Module (ECM) supplies the ground path to the relay coil control circuit via an internal integrated circuit called an Output Driver Module (ODM). The ODM output control is configured to operate as a low side driver for the powertrain relay. The ODM for the powertrain relay also incorporates a fault detection circuit, which is continuously monitored by the ECM. When the ECM commands the powertrain relay ON, ignition 1 voltage is supplied to the ECM, and to several additional circuits.
OBDII Code P0685 2014 Chevrolet Silverado - Engine Control Module Power Relay Control Circuit Open - AutoCodes.com
P0685 2014 Chevrolet Silverado Code - Engine Control Module Power Relay Control Circuit Open

What are the Possible Causes of the DTC P0685 2014 Chevrolet Silverado?

  • Weak battery
  • Low voltage while cranking
  • Faulty Engine Control Module (ECM) power relay
  • ECM power relay harness is open or shorted
  • ECM power relay circuit poor electrical connection
  • Blown ECM fuse
  • Faulty ECM

How to Fix the DTC P0685 2014 Chevrolet Silverado?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

Code Tech Notes

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P0685 2014 Chevrolet Silverado code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P0685 2014 Chevrolet Silverado code?

Need more information on how to fix the P0685 2014 Chevrolet Silverado code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0685 2014 Chevrolet Silverado code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0685 2014 Chevrolet Silverado Code

What does the OBDII code P0685 mean for a 2014 Chevrolet Silverado?

Code P0685 indicates that the Engine Control Module (ECM) Power Relay Control Circuit is open, meaning the ECM is not receiving the proper power supply.

What are the common symptoms of code P0685 in a 2014 Chevrolet Silverado?

Symptoms include difficulty starting the engine, a no-start condition, reduced engine performance, and the Check Engine Light being illuminated.

What causes the P0685 code in a 2014 Chevrolet Silverado?

Common causes include a faulty ECM power relay, damaged wiring or connectors in the control circuit, or a malfunctioning ECM.

Can a bad battery cause the P0685 code?

Yes, a weak or failing battery can contribute to this code if it disrupts the power supply to the ECM.

How do you diagnose the P0685 code in a 2014 Chevrolet Silverado?

Diagnosis involves inspecting the ECM power relay, checking the wiring and connectors for damage or corrosion, and testing the relay and circuit for proper operation.

Can I drive my 2014 Chevrolet Silverado with the P0685 code?

Driving with this code is not recommended, as it can lead to engine failure or a no-start condition, potentially leaving you stranded.

How is the P0685 code repaired on a 2014 Chevrolet Silverado?

Repairs typically involve replacing the ECM power relay, repairing damaged wiring or connectors, or, in rare cases, replacing the ECM.

How much does it cost to fix the P0685 code on a 2014 Chevrolet Silverado?

Repair costs vary but typically range from $50 to $200 for parts and labor, depending on the specific issue and location.

Can a P0685 code trigger other codes in the ECM?

Yes, an open circuit in the ECM power relay can cause communication errors, leading to additional codes being stored in the ECM.

How can I prevent the P0685 code from occurring?

Regular maintenance, such as inspecting wiring and connectors for damage and ensuring the battery is in good condition, can help prevent this code.

Discuss the causes and fixes for P0685 2014 Chevrolet Silverado OBDII Code

Code P0685 2014 Chevrolet Silverado comments

No comments found for this page.

AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play