AutoCodesAudi – P0675 Audi

P0675 Audi Code - Cylinder 5 Glow Plug Circuit Fault

Quick Answer

The glow plug system is used to assist in providing the heat required to begin combustion during cold engine temperatures. Common causes include Faulty cylinder #5 glow plug, Cylinder #5 glow plug harness is open or shorted, Cylinder #5 glow plug circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
P0675 Audi indicates Cylinder 5 Glow Plug Circuit Fault.
Common causes
Common causes include Faulty cylinder #5 glow plug, Cylinder #5 glow plug harness is open or shorted, Cylinder #5 glow plug circuit poor electrical connection.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
AI answers can be wrong. Verify repairs with testing. Open full chat
Code Popularity 637
How popular is this code, among other codes? Low
Table of contents Created and updated by William Orellana on Jul 18, 2022
💬 Need more help? Ask Coddy for instant answers — it's free!

Code P0675 Audi Description

The glow plug system is used to assist in providing the heat required to begin combustion during cold engine temperatures. The glow plugs are heated before and during cranking, as well as initial engine operation. The Engine Control Module (ECM) controls the glow plug ON times by monitoring coolant temperature and glow plug voltage. The California Glow Plug system has eight individual glow plug supply circuits between the controller and the glow plugs. If the feedback voltage from the controller to the ECM is not within range, the ECM sets the OBDII code.
OBDII Code P0675 Audi - Cylinder 5 Glow Plug Circuit Fault - AutoCodes.com
P0675 Audi Code - Cylinder 5 Glow Plug Circuit Fault

What are the Possible Causes of the DTC P0675 Audi?

  • Faulty cylinder #5 glow plug
  • Cylinder #5 glow plug harness is open or shorted
  • Cylinder #5 glow plug circuit poor electrical connection
  • Faulty glow plug module

How to Fix the DTC P0675 Audi?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P0675 Audi code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P0675 Audi code?

Need more information on how to fix the P0675 Audi code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0675 Audi code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0675 Audi Code

1. What does the OBDII code P0675 mean in an Audi?

P0675 indicates a fault in the glow plug circuit for cylinder 5, which may affect cold starting and engine performance.

2. What are common symptoms of the P0675 code in an Audi?

Symptoms include difficulty starting in cold weather, rough idling, reduced fuel efficiency, and the check engine light being illuminated.

3. What causes the P0675 code to appear in an Audi?

Common causes include a failed glow plug in cylinder 5, damaged wiring or connectors, a faulty glow plug control module, or corrosion in the circuit.

4. Can I drive my Audi with the P0675 code?

While driving with the P0675 code is possible, it’s not recommended as it may lead to poor engine performance, especially in cold weather.

5. How do I diagnose the P0675 code in an Audi?

Diagnosis involves inspecting the glow plug, testing the circuit for continuity, checking for damaged wiring, and using a multimeter to test the glow plug control module.

6. How do I fix the P0675 code in an Audi?

Repairs may include replacing the faulty glow plug in cylinder 5, repairing or replacing damaged wiring, or replacing the glow plug control module if needed.

7. What tools are needed to fix the P0675 code?

You may need a diagnostic scanner, a multimeter, basic hand tools, and possibly a glow plug removal tool.

8. How much does it cost to fix the P0675 code in an Audi?

The cost depends on the issue but typically ranges from $50 to $150 for a glow plug replacement, with additional costs for labor or wiring repairs.

9. Can a bad glow plug damage my Audi engine?

A bad glow plug itself won’t directly damage the engine, but prolonged issues can lead to starting difficulties and increased strain on the battery and starter.

10. How can I prevent the P0675 code from recurring?

Regular maintenance, timely replacement of glow plugs, and keeping the wiring and connectors clean and corrosion-free can help prevent this code.

Discuss the causes and fixes for P0675 Audi OBDII Code

Code P0675 Audi comments

No comments found for this page.

AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play