Check the "Possible Causes" listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector's pins.
The cost of diagnosing the P0672 RAM code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle's make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.
The glow plug system is used to assist in providing the heat required to begin combustion during cold engine temperatures. The glow plugs are heated before and during cranking, as well as initial engine operation. The Engine Control Module (ECM) controls the glow plug ON times by monitoring coolant temperature and glow plug voltage. The glow plug system has individual glow plug supply circuits between the controller and the glow plugs. If the feedback voltage from the controller to the ECM is not within range, the ECM sets the OBDII code. The Diagnostic Trouble Code (DTC) will set if the Engine Control Module has detected a fault in the cylinder #2 glow plug circuit.
Need more information on how to fix the P0672 RAM code? Get Access to Factory Service Manuals
Get the P0672 RAM code diagnosed by a professional: Find a repair shop in your area
Help us improve AutoCodes.com. Leave a comment below or tell us if the information above helps you fix the code. What are the symptoms on your vehicle for the P0672 RAM code? Have you replaced any parts?
Any information is appreciated. Thanks